6306-2NSENR Nachi Bearing Sealed C3 Snap Ring Japan 30x72x19 Bearings

6306-2NSENR Nachi Bearing Sealed C3 Snap Ring Japan 30x72x19 Bearings

Nachi
4 Reviews
$23.88
  • .: Item: 6306-2NSENR Nachi Ball Bearing
  • .: Type: Nachi Deep groove Ball Bearing
  • .: Closures: Double sealed rubber seals RS/RS1/2RS1
  • .: Radial Clearance: C3
  • .: Dimensions: 30mm x 72mm x 19mm/Metric
Product Code: Kit9795

Description

6306-2NSENR Nachi Bearing
With Snap Ring (C clip)
30mm x 72mm x 19mm
Made in Japan



6306-2NSENR Nachi Bearing with a Snap Ring, the 6306-2NSENR inner diameter is 30mm, the 6306-2NSENR outer diameter is 72mm, the 6306-2NSENR width is 19mm.

  • Item: 6306-2NSENR Nachi Ball Bearing
  • Type: Nachi Deep groove Ball Bearing
  • Closures: Double sealed rubber seals RS/RS1/2RS1
  • Radial Clearance: C3
  • Dimensions: 30mm x 72mm x 19mm/Metric
  • ID (inner diameter)/Bore: 20mm
  • OD (outer diameter): 52mm
  • Width/Height/thickness: 15mm
  • Size: 30 x 72 x 19 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 26,700 N
  • Static load rating Cor: 15,000 N
  • Limiting Speed:
    • Grease Lubrication: 6,700 RPM
  • Equal: 6306 RS / 6306 2RS
  • Made in Japan

Advanced Seal Design Provides
Excellent Protection and Smooth Operation

The combination of a unique lip design and seal groove provides a labrinth and steady seal contact.Breathing mechanism avoids torque increases caused byinternal pressure variation due to changes in operating temperatures.NSE seals allow NACHI bearings to have constant smooth operation and long service life.

  • Superior in Sealing Out Dust, Dirt, and Contamination
  • Superb Grease Retention
  • Light Torque
    The Best Components Yield the Greatest Bearing Performance
    Rings and balls made of select material have superbly controlled accuracy such as roundness, contour,surface finish, and hardness to provide quieter operation, reduced vibration levels, and long life.Rivet-type pressed steel cages for strength and durability.High-performance grease for long life and low noise.

  • 6306-2NSENR Nachi Bearing Sealed C3 Snap Ring Japan 30x72x19 Bearings


    Kit9795

    Reviews

    Average Rating:
    ( 4 )
    Anonymous Person from Lake Worth, FL United States
    December 23, 2021
    Quality bearings
    Was this review helpful to you?
    Chuck E from San Jose, CA
    April 6, 2015
    Ford V8 trans rear
    Sealed bearing alternative to original Ford V8 transmission rear - main shaft gear bearing. Remove seal on inner side to lube bearing with transmission oil. Provides leak resistant seal.
    Was this review helpful to you?
    D-
    October 4, 2012
    OK
    REPAIRS
    Was this review helpful to you?
    prototypecycle from Troy, MI
    May 16, 2015
    Easy bearing to specify
    I really appreciated that the full bearing specifications were in the description - right down to the inclusion of the snap ring, which I needed. This bearing was used as a substitute for a normally non-sealed bearing on an early (1948) Ford 3-speed transmission. To prevent leakage, I wanted a double sealed bearing. This product gave me exactly what I wanted.
    Was this review helpful to you?

    YOUR CART