S608-2RS Skate Bearing 8x22x7 Stainless Steel Sealed Bearings
S608-2RS Skate Bearing 8x22x7 Stainless Steel Sealed Bearings - Image 1 of 0
S608-2RS Skate Bearing 8x22x7 Stainless Steel Sealed Bearings - Video 2 of 1
S608-2RS Skate Bearing 8x22x7 Stainless Steel Sealed Bearings - Image 1 of 0
S608-2RS Skate Bearing 8x22x7 Stainless Steel Sealed Bearings - Video 2 of 1
S608-2RS Skate Bearing 8x22x7 Stainless Steel Sealed Bearings - Image 1 of 0
S608-2RS Skate Bearing 8x22x7 Stainless Steel Sealed Bearings - Video 2 of 1

S608-2RS Skate Bearing 8x22x7 Stainless Steel Sealed Bearings

VXB
23 Reviews
$6.49
  • .: Item: S608-2RS Ball Bearing
  • .: Type: Deep Groove Ball Bearing
  • .: Closures: 2 Rubber Seals
  • .: Material: Stainless Steel
  • .: Size: 8mm x 22mm x 7mm
Product Code: Kit7517

Description

S608-2RS Stainless Steel Sealed Ball Bearing
8mm x 22mm x 7mm


"S608-2RS
"S608-2RS

S608-2RS Stainless Steel Sealed Ball Bearing, Bearing is made of Stainless Steel, bearing has 2 Rubber Seal to protect the bearing from dust or any possible contamination.

  • Item: S608-2RS Ball Bearing
  • Type: Deep Groove Ball Bearing
  • Closures: 2 Rubber Seals
  • Material: Stainless Steel
  • Size: 8mm x 22mm x 7mm
  • Inner Diameter: 8mm
  • Outer Diameter: 22mm
  • Width: 7mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 3,300 N
  • Static load rating Cor: 1,350 N
  • Limiting Speed:
    • Grease Lubrication: 34,000 RPM

VXB Category: 8mm Skate Bearings

S608-2RS Skate Bearing 8x22x7 Stainless Steel Sealed Bearings

Kit7517

Reviews

Average Rating:
( 23 )
David from Grapevine, TX United States
July 20, 2016
S608-2RS Skate Bearing
I am very pleased with my bearing purchase with VXB.
Was this review helpful to you?
RICHARD RUGGLES from Davie, FL United States
June 27, 2016
S608-2RS Skate Bearing 8x22x7 Stainless Steel Seal
Fast delivery and service.I Received advice on the best choice of bearing for my application. I use the bearings in a CNC spindle which turns up to 30,000 rpm. I found that the stainless Steel Bearings have the longest life. I tried ceramic bearings in the past but due to the vibration in the spindle they did not last very long.
Was this review helpful to you?
tj
May 3, 2015
fit like a charm
used it to repair household vacuum kept it out of the local garbage landfill ! works for me .
Was this review helpful to you?
Vance
October 21, 2013
Excellent
I used these bearings to create a Luthier's duplicating jig. They run smoothly and accurately which is an important factor. I thoroughly recommend this product.
Was this review helpful to you?
Ron from South Florida
September 18, 2013
Will it Rust
Since a magnet was able to grab it I suspect it will also rust in time; not what I had hoped for as the use is inside a salt water wash-down pump that sits in the damp environment of a boat. Time will tell so I took the middle ground with the star system here. Until it's proven to last at least 12 months I would not recommend it.
Was this review helpful to you?

YOUR CART