7014CYP4BNLS Nachi Angular Contact Bearing 70x110x20:Abec-7:Japan

7014CYP4BNLS Nachi Angular Contact Bearing 70x110x20:Abec-7:Japan

Nachi
0 Reviews
$433.88
Product Code: Kit10797

Description

7014CYP4BNLS Nachi Angular Abec-7 Ball Bearing
70mm x 110mm x 20mm
15 Contact Angle
Polyamide resin cage
Made in Japan



7014CYP4BNLS Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Abec-7 Made in Japan, 7014CYP4BNLS inner diameter is 70mm, 7014CYP4BNLS outer diameter is 110mm, 7014CYP4BNLS width is 20mm.

  • Item: 7014CYP4BNLS Angular Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Dimensions: 70mm x 110mm x 20mm/Metric
  • Bearing Inner Diameter: 70mm
  • Bearing Outer Diameter: 110mm
  • Bearing Width: 20mm
  • Size: 70 x 110 x 20 mm
  • Quality: ABEC-7
  • Cage: Polyamide resin cage
  • Basic Dynamic Load Cr (KN): 47.0
  • Made in Japan
  • Quantity: One Bearing


dDBrr1
70mm110mm20mm1.10.6

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

ngs are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

Kit10797

Reviews

Average Rating:
( 0 )

YOUR CART