Home > View All > Collar Inner > 3mm
We found 26 results matching your criteria.
Sort By:
Page of 1
NSC-3-8-C NBK Set Collar - Set Screw Type - Steel  NBK  Ferrosoferric Oxide Film Pack of 1 Collar Made in Japan NSC-3-6-M NBK Set Collar - Set Screw Type. Made in Japan NSC-3-8-M NBK Set Collar - Set Screw Type. Made in Japan
NSC-3-8-C NBK Set Collar - Set Screw Type - Steel NBK
Main body Black (Ferrosoferric Oxide Film S45C)
One Collar
NBK - Made in Japan

Characteristics:
  • Standard type set collar.
  • It is attached to the shaft by the set screws.
  • Chamfer on one side end face is larger (bore diameter 8 mm or above).
  • This avoids interference of the set collar with the external wheel when the bearing is fixed..



Part NumberdBDD1M*1
NSC-3-8-C-NBK 3mm8mm7mm -M3
‹¬?1‹¬????If d dimension is 6 or below, one point.

NSC-3-8-C NBK Set Collar - Set Screw Type - Steel Ferrosoferric Oxide Film

NSC-3-8-C-NBK

NSC-3-6-M NBK Set Collar - Set Screw Type. Made in Japan



Characteristics:
  • Standard type set collar.
  • It is attached to the shaft by the set screws.
  • Chamfer on one side end face is larger (bore diameter 8 mm or above).
  • This avoids interference of the set collar with the external wheel when the bearing is fixed.
  • .


Part Number d B D D1 M *1 Quantity Per Pack
NSC-3-6-M-NBK 3mm 6mm 7mm - M3 1

NSC-3-6-M NBK Set Collar - Set Screw Type. Made in Japan

NSC-3-6-M-NBK

NSC-3-8-M NBK Set Collar - Set Screw Type. Made in Japan



Characteristics:
  • Standard type set collar.
  • It is attached to the shaft by the set screws.
  • Chamfer on one side end face is larger (bore diameter 8 mm or above).
  • This avoids interference of the set collar with the external wheel when the bearing is fixed.
  • .


Part Number d B D D1 M *1 Quantity Per Pack
NSC-3-8-M-NBK 3mm 8mm 7mm - M3 1

NSC-3-8-M NBK Set Collar - Set Screw Type. Made in Japan

NSC-3-8-M-NBK

NSC-3-6-C NBK Set Collar - Set Screw Type - Steel  NBK  Ferrosoferric Oxide Film Pack of 1 Collar Made in Japan NSC-3-6-S NBK Steel Collar - Set Screw Hex Socket SUSXM7 Type -  NBK - One Collar Made in Japan NSC-3-8-S NBK Steel Collar - Set Screw Hex Socket SUSXM7 Type -  NBK - One Collar Made in Japan
NSC-3-6-C NBK Set Collar - Set Screw Type - Steel NBK
Main body Black (Ferrosoferric Oxide Film S45C)
One Collar
NBK - Made in Japan

Characteristics:
  • Standard type set collar.
  • It is attached to the shaft by the set screws.
  • Chamfer on one side end face is larger (bore diameter 8 mm or above).
  • This avoids interference of the set collar with the external wheel when the bearing is fixed..



Part NumberdBDD1M*1
NSC-3-6-C-NBK 3mm6mm7mm -M3
‹¬?1‹¬????If d dimension is 6 or below, one point.

NSC-3-6-C NBK Set Collar - Set Screw Type - Steel Ferrosoferric Oxide Film

NSC-3-6-C-NBK

NSC-3-6-S NBK Steel Collar - Set Screw Hex Socket SUSXM7 Type
Main body (Stainless Steel SUS304
)
One Collar
NBK - Made in Japan

Characteristics:
  • Standard type set collar.
  • It is attached to the shaft by the set screws.
  • Chamfer on one side end face is larger (bore diameter 8 mm or above).
  • This avoids interference of the set collar with the external wheel when the bearing is fixed..



Part Number d B D D1 M* 1
NSC-3-6-S-NBK 3mm 6mm 7mm -
M3
*1: If d dimension is 6 or below, one point.

NSC-3-6-S NBK Set Collar - Set Screw Type Stainless Steel

NSC-3-6-S-NBK

NSC-3-8-S NBK Steel Collar - Set Screw Hex Socket SUSXM7 Type
Main body (Stainless Steel SUS304
)
One Collar
NBK - Made in Japan

Characteristics:
  • Standard type set collar.
  • It is attached to the shaft by the set screws.
  • Chamfer on one side end face is larger (bore diameter 8 mm or above).
  • This avoids interference of the set collar with the external wheel when the bearing is fixed..



Part Number d B D D1 M* 1
NSC-3-8-S-NBK 3mm 8mm 7mm -
M3
*1: If d dimension is 6 or below, one point.

NSC-3-8-S NBK Set Collar - Set Screw Type Stainless Steel

NSC-3-8-S-NBK

NSC-3-6-SP2 NBK Steel Set Collar with Installation Hole - Set Screw Type -  NBK - One Collar Made in Japan NSCS-3-8-M NBK Set Collar - Set Screw Type. Made in Japan NSC-3-6-SP2 NBK Steel Set Collar with Installation Hole - Set Screw Type -  NBK - One Collar Made in Japan
NSC-3-6-SP2 NBK Steel Set Collar - with Installation Hole - Set Screw Type
Main body Ferrous ferric Oxide S45C Film (Black)
Hex Socket Set Screw Ferrous ferric Oxide SCM435 Film (Black)
NBK - Made in Japan


Characteristics:
  • Set collar with installation hole. It can be installed to any machine and device such as wheels, flanges and plates, by using the fixing hole.
  • It is attached to the shaft by the set screws.



Part Number d B D S P M* 1
NSC-3-6-SP2-NBK 3mm 6mm 17mm 3.4mm 11mm
M3
●Hex socket set screw is provided.
*1 : If d dimension is 5 or below, one point.

NSC-3-6-CP2 NBK Set Collar - Set Collar - with Installation Hole - Set Screw Type - Ferrosoferric Oxide

NSC-3-6-CP2-NBK

NSCS-3-8-M NBK Set Collar - Set Screw Type. Made in Japan



Characteristics:
  • Main body: S45C-Electrolysis-Nickel Plating
  • Hex Socket: SUSXM7
  • Standard type set collar.
  • It is attached to the shaft by the set screws.
  • Installation and removing are easy. Moreover this does not scratch the shaft.
  • Optimal for machines and devices that are frequently mounted/removed, e.g. slide shaft.
  • .


Part Number d B D F M Quantity Per Pack
NSCS-3-8-M-NBK 3mm 8mm 15mm 4.5 M3 1

NSCS-3-8-M NBK Set Collar - Set Screw Type. Made in Japan

NSCS-3-8-M-NBK

NSC-3-6-SP2 NBK Steel Set Collar - with Installation Hole - Set Screw Type
Main body (
SUS304 - Steel )
Hex Socket Set Screw ( SUSXM7 )
NBK - Made in Japan

Characteristics:
  • Set collar with installation hole. It can be installed to any machine and device such as wheels, flanges and plates, by using the fixing hole.
  • It is attached to the shaft by the set screws.



Part Number d B D S P M* 1
NSC-3-6-SP2-NBK 3mm 6mm 17mm 3.4mm 11mm
M3
●Hex socket set screw is provided.
*1 : If d dimension is 5 or below, one point.

NSC-3-6-SP2 NBK Set Collar - Set Collar - with Installation Hole - Set Screw Type Steel

NSC-3-6-SP2-NBK

NSCS-3-8-C NBK Set Collar - Clamping Type - Steel  NBK  Ferrosoferric Oxide Film - Black Pack of 1 Collar Made in Japan NSCSS-3-8-C NBK Set Collar  Split  type - Steel  Ferrosoferric Oxide Film One Collar Made in Japan NSCS-3-8-S NBK Collar Clamping Type - Steel  Hex Socket Head Cap Screw  One Collar Made in Japan
NSCS-3-8-C NBK Set Collar - Clamping Type - Steel
with Hexagon Socket Bolt SS400 - Hex Socket Head Cap Screw-Black
Main body Black (Ferrosoferric Oxide Film S45C)
One Collar
NBK - Made in Japan

Characteristics:
  • Clamping type set collar.
  • Installation and removing are easy. Moreover this does not scratch the shaft.
  • Optimal for machines and devices that are frequently mounted/removed, e.g. slide shaft.



Part Number d B D F M
NSCS-3-8-C-NBK 3mm 8mm 15mm 4.5mm
M3
*Hex socket head cap screw is provided

NSCS-3-8-C NBK Set Collar - Clamping Type - Steel Ferrosoferric Oxide Film - Black

NSCS-3-8-C-NBK - Japan

NSCSS-3-8-C NBK Set Collar Split type - Steel
SCM435 Hex Socket Head Cap Screw
Main body Black (Ferrosoferric Oxide Film S45C)
One Collar
NBK - Made in Japan

Characteristics:
  • Split-type set collar.
  • As the axial hole part can be completely split, so mounting and removing can be performed easily. Moreover this does not scratch the shaft.
  • Optimal for use with machines and devices that are difficult to disassemble



Part Number d B D F M
NSCSS-3-8-C-NBK 3mm 8mm 15mm 4.5mm
M3
*Hex socket head cap screw is provided

NSCSS-3-8-C NBK Set Collar - Split Type - Steel Ferrosoferric Oxide Film - Black

NSCSS-3-8-C-NBK - Japan

NSCS-3-8-S NBK Set Collar - Clamping Type
Hex Socket Head Cap Screw SUSXM7
Main body SUS304 Steel
One Collar
NBK - Made in Japan

Characteristics:
  • Clamping type set collar.
  • Installation and removing are easy. Moreover this does not scratch the shaft.
  • Optimal for machines and devices that are frequently mounted/removed, e.g. slide shaft.



Part Number d B D F M
NSCS-3-8-S-NBK 3mm 8mm 15mm 4.5mm
M3
*Hex socket head cap screw is provided

NSCS-3-8-S NBK Set Collar - Clamping Type - Steel

Made in - Japan

NSCS-3-8-S-NBK

NSCSS-3-8-M NBK Set Collar  Split  type - Steel Electroless Nickel Plating One Collar Made in Japan NSCSS-3-8-S NBK Set Collar  Split  type - Stainless Steel One Collar Made in Japan NSCS-3-8-SB NBK Stainless Steel Set Collar For Securing Bearing 
Clamping Type. Made in Japan
NSCSS-3-8-M NBK Set Collar Split type - Steel
Main body ( S45C Electroless Nickel Plating )
SUSXM7 Hex Socket Head Cap Screw
One Collar
NBK - Made in Japan

Characteristics:
  • Split-type set collar.
  • As the axial hole part can be completely split, so mounting and removing can be performed easily. Moreover this does not scratch the shaft.
  • Optimal for use with machines and devices that are difficult to disassemble




Part Number d B D F M
NSCSS-3-8-M-NBK 3mm 8mm 15mm 4.5mm
M3
*Hex socket head cap screw is provided

NSCSS-3-8-M NBK Set Collar - Split Type - Steel Electroless Nickel Plating

NSCSS-3-8-M-NBK

Made in Japan

NSCSS-3-8-S NBK - Stainless Steel
Main body ( SUS304 Stainless Steel )
SUSXM7 Hex Socket Head Cap Screw
One Collar
NBK - Made in Japan

Characteristics:
  • Split-type set collar.
  • As the axial hole part can be completely split, so mounting and removing can be performed easily. Moreover this does not scratch the shaft.
  • Optimal for use with machines and devices that are difficult to disassemble




Part Number d B D F M
NSCSS-3-8-S-NBK 3mm 8mm 15mm 4.5mm
M3
*Hex socket head cap screw is provided

NSCSS-3-8-S NBK Set Collar Split Type

Stainless Steel

NSCSS-3-8-S-NBK

Made in Japan

NSCS-3-8-SB NBK Stainless Steel Set Collar For Securing Bearing
Clamping Type. Made in Japan



Characteristics:
  • Main BodySUS304
  • Hex Socket Head Cap ScrewSUSXM7
  • Standard type set collar.
  • It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
  • Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
  • Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
  • .


Part Number d B B1 D D1 F M Applicable bearings
NSCS-3-8-SB-NBK3mm 8.5mm7.5mm 15 5 4.5 M3693ZZ?Ÿ¯623ZZ

NSCS-3-8-SB NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan

NNSCS-3-8-SB-NBK

NSCS-4-8-SB NBK Stainless Steel Set Collar For Securing Bearing 
Clamping Type. Made in Japan NSCS-8-8-SB1 NBK Stainless Steel Set Collar For Securing Bearing 
Clamping Type. Made in Japan NSCS-8-8-SB2 NBK Stainless Steel Set Collar For Securing Bearing 
Clamping Type. Made in Japan
NSCS-4-8-SB NBK Stainless Steel Set Collar For Securing Bearing
Clamping Type. Made in Japan



Characteristics:
  • Main BodySUS304
  • Hex Socket Head Cap ScrewSUSXM7
  • Standard type set collar.
  • It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
  • Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
  • Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
  • .


Part Number d B B1 D D1 F M Applicable bearings
NSCS-4-8-SB-NBK4mm 8.5mm7.5mm 15 5 4.5 M3694ZZ?Ÿ¯624ZZ

NSCS-4-8-SB NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan

NNSCS-4-8-SB-NBK

NSCS-8-8-SB1 NBK Stainless Steel Set Collar For Securing Bearing
Clamping Type. Made in Japan



Characteristics:
  • Main BodySUS304
  • Hex Socket Head Cap ScrewSUSXM7
  • Standard type set collar.
  • It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
  • Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
  • Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
  • .


Part Number d B B1 D D1 F M Applicable bearings
NSCS-8-8-SB1-NBK8mm 8.5mm7.5mm2011.77 M3?Ÿ¯608ZZ?Ÿ¯

NSCS-8-8-SB1 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan

NNSCS-8-8-SB1-NBK

NSCS-8-8-SB2 NBK Stainless Steel Set Collar For Securing Bearing
Clamping Type. Made in Japan



Characteristics:
  • Main BodySUS304
  • Hex Socket Head Cap ScrewSUSXM7
  • Standard type set collar.
  • It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
  • Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
  • Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
  • .


Part Number d B B1 D D1 F M Applicable bearings
NSCS-8-8-SB2-NBK8mm 8.5mm7.5mm2013.27 M3?Ÿ¯628ZZ?Ÿ¯

NSCS-8-8-SB2 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan

NNSCS-8-8-SB2-NBK

NSCS-8-8-SB3 NBK Stainless Steel Set Collar For Securing Bearing 
Clamping Type. Made in Japan NSCS-5-8-SB NBK Stainless Steel Set Collar For Securing Bearing 
Clamping Type. Made in Japan NSCS-10-11-SB1 NBK Stainless Steel Set Collar For Securing Bearing 
Clamping Type. Made in Japan
NSCS-8-8-SB3 NBK Stainless Steel Set Collar For Securing Bearing
Clamping Type. Made in Japan



Characteristics:
  • Main BodySUS304
  • Hex Socket Head Cap ScrewSUSXM7
  • Standard type set collar.
  • It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
  • Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
  • Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
  • .


Part Number d B B1 D D1 F M Applicable bearings
NSCS-8-8-SB3-NBK8mm 8.5mm7.5mm2011.27 M3?Ÿ¯698ZZ?Ÿ¯

NSCS-8-8-SB3 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan

NNSCS-8-8-SB3-NBK

NSCS-5-8-SB NBK Stainless Steel Set Collar For Securing Bearing
Clamping Type. Made in Japan



Characteristics:
  • Main BodySUS304
  • Hex Socket Head Cap ScrewSUSXM7
  • Standard type set collar.
  • It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
  • Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
  • Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
  • .


Part Number d B B1 D D1 F M Applicable bearings
NSCS-5-8-SB-NBK5mm 8.5mm7.5mm207.26 M3695ZZ?Ÿ¯606ZZ?Ÿ¯625ZZ

NSCS-5-8-SB NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan

NNSCS-5-8-SB-NBK

NSCS-10-11-SB1 NBK Stainless Steel Set Collar For Securing Bearing
Clamping Type. Made in Japan



Characteristics:
  • Main BodySUS304
  • Hex Socket Head Cap ScrewSUSXM7
  • Standard type set collar.
  • It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
  • Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
  • Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
  • .


Part Number d B B1 D D1 F M Applicable bearings
NSCS-10-11-SB1-NBK10mm 11mm9mm3014.79M4?Ÿ¯6000ZZ?Ÿ¯

NSCS-10-11-SB1 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan

NSCS-10-11-SB1-NBK

NSCS-10-11-SB2 NBK Stainless Steel Set Collar For Securing Bearing 
Clamping Type. Made in Japan NSCS-10-11-SB3 NBK Stainless Steel Set Collar For Securing Bearing 
Clamping Type. Made in Japan NSCS-6-8-SB1 NBK Stainless Steel Set Collar For Securing Bearing 
Clamping Type. Made in Japan
NSCS-10-11-SB2 NBK Stainless Steel Set Collar For Securing Bearing
Clamping Type. Made in Japan



Characteristics:
  • Main BodySUS304
  • Hex Socket Head Cap ScrewSUSXM7
  • Standard type set collar.
  • It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
  • Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
  • Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
  • .


Part Number d B B1 D D1 F M Applicable bearings
NSCS-10-11-SB2-NBK10mm 11mm9mm3017.29M4?Ÿ¯6200ZZ?Ÿ¯

NSCS-10-11-SB2 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan

NNSCS-10-11-SB2-NBK

NSCS-10-11-SB3 NBK Stainless Steel Set Collar For Securing Bearing
Clamping Type. Made in Japan



Characteristics:
  • Main BodySUS304
  • Hex Socket Head Cap ScrewSUSXM7
  • Standard type set collar.
  • It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
  • Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
  • Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
  • .


Part Number d B B1 D D1 F M Applicable bearings
NSCS-10-11-SB3-NBK10mm 11mm9mm3014.29M4?Ÿ¯6200ZZ?Ÿ¯

NSCS-10-11-SB3 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan

NSCS-10-11-SB3-NBK

NSCS-6-8-SB1 NBK Stainless Steel Set Collar For Securing Bearing
Clamping Type. Made in Japan



Characteristics:
  • Main BodySUS304
  • Hex Socket Head Cap ScrewSUSXM7
  • Standard type set collar.
  • It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
  • Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
  • Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
  • .


Part Number d B B1 D D1 F M Applicable bearings
NSCS-6-8-SB1-NBK6mm 8.5mm7.5mm209.46.5 M3?Ÿ¯606ZZ?Ÿ¯

NSCS-6-8-SB1 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan

NNSCS-6-8-SB1-NBK

NSCS-6-8-SB2 NBK Stainless Steel Set Collar For Securing Bearing 
Clamping Type. Made in Japan NSCS-6-8-SB3 NBK Stainless Steel Set Collar For Securing Bearing 
Clamping Type. Made in Japan
NSCS-6-8-SB2 NBK Stainless Steel Set Collar For Securing Bearing
Clamping Type. Made in Japan



Characteristics:
  • Main BodySUS304
  • Hex Socket Head Cap ScrewSUSXM7
  • Standard type set collar.
  • It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
  • Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
  • Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
  • .


Part Number d B B1 D D1 F M Applicable bearings
NSCS-6-8-SB2-NBK6mm 8.5mm7.5mm209.76.5 M3?Ÿ¯626ZZ?Ÿ¯

NSCS-6-8-SB2 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan

NNSCS-6-8-SB2-NBK

NSCS-6-8-SB3 NBK Stainless Steel Set Collar For Securing Bearing
Clamping Type. Made in Japan



Characteristics:
  • Main BodySUS304
  • Hex Socket Head Cap ScrewSUSXM7
  • Standard type set collar.
  • It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
  • Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
  • Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
  • .


Part Number d B B1 D D1 F M Applicable bearings
NSCS-6-8-SB3-NBK6mm 8.5mm7.5mm209.16.5 M3?Ÿ¯696ZZ?Ÿ¯

NSCS-6-8-SB3 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan

NNSCS-6-8-SB3-NBK

   
 
Collar Inner, 3mm

3mm

Collar Inner