Nachi

NJ211MY Nachi Cylindrical Roller Bearing Japan 55x100x21 Bearings

No reviews
$202.99
SKU: Kit10230
UPC: 00193019087022
Item: NJ211MY Cylindrical Roller Bearing
Type: Nachi Cylindrical Roller Bearing
Cage: Bronze Cage
Dimensions: 55mm x 100mm x 21mm/Metric
ID (inner diameter)/Bore: 55mm
NJ211MY Nachi Cylindrical Roller Bearing
Bronze Cage
55mm x 100mm x 21mm
Made in Japan


NJ211MY Nachi Cylindrical Roller Bearing, Bronze Cage, Made in Japan, the NJ211MY inner diameter is 55mm, the NJ211MY outer diameter is 100mm, NJ211MY width is 21mm.

  • Item: NJ211MY Cylindrical Roller Bearing
  • Type: Nachi Cylindrical Roller Bearing
  • Cage: Bronze Cage
  • Dimensions: 55mm x 100mm x 21mm/Metric
  • ID (inner diameter)/Bore: 55mm
  • OD (outer diameter): 100mm
  • Width/Height/thickness: 21mm
  • Size: 55 x 100 x 21 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 58,000 N
  • Static load rating Cor: 62,000 N
  • Limiting Speed:
    • Grease Lubrication: 6,300 RPM
    • Oil Lubrication: 7,500 RPM
  • Made in Japan

Construction of this roller bearing type is the simplest of all radial roller bearings. This bearing type is often used in high-speed applications. Because the inner ring, outer ring, and rollers are in line contact, this bearing type has a large radial load capacity. Various Cylindrical roller bearing configurations are:N,NJ,NF,NU,RNU : integral ribs (flanges)
NH,NP,NUP,NUH : integral and loose ribs
NN,NNU : double-row bearings
Configurations having integral flanges or loose ribs on both the inner and outer rings can sustain a small amount of axial load. Since this bearing type supports axial loads as sliding action between the end of the rollers and flange faces, axial loading is limited. Double-row Cylindrical roller bearings are used for high-speed, high-accuracy applications such as; main spindle support for lathes, milling machines, and machining centers. Radial clearance of tapered-bore bearings can be adjusted during mounting of the bearing(s) onto the mating journal. Standard cages are pressed steel or polyamide resin. Machined cages of high-strength brass are used for bearings of large dimension or for high-speed applications.