Home > Bearings for Hobby > Skate Bearings > Skateboard Bearings >

8 Skateboard Extended Bearing with Built-in Spacers
8 Skateboard Extended Bearing with Built-in Spacers


 
Our Price: $19.49
. Item: 608RS Extended Skateboard Bearings
. Type: Extended Inner Ring Skateboard Bearings
. Material: Chrome Steel
. Closures: One side Rubber Seal
. Quantity: Set of 8 Bearing

Product Code: KIT14048
Qty:

Description
 
608RS Skateboard Bearings With Extended inner race
8mm x 22mm x 7mm
inner race width=13mm
No Need for Spacers


"608RS
"608RS

608RS Skateboard Bearings With Extended inner race, that will eliminate the use of spacers,you will get more rigid/smooth wheel set when you use these bearings,these bearing is sealed on one side (the outer side) with rubber seal,Bearings are made of Chrome Steel,each bearing have One Rubber Seal to protect the bearing fromdust or any possible contamination.

  • Item: 608RS Extended Skateboard Bearings
  • Type: Extended Inner Ring Skateboard Bearings
  • Material: Chrome Steel
  • Closures: One side Rubber Seal
  • Quantity: Set of 8 Bearing
  • Size: 8mm x 22mm x 7mm/13mm
  • Inner Diameter: 8mm
  • Outer Diameter: 22mm
  • inner race Width: 13mm
  • outer ring width: 7mm

8 Skateboard Extended Bearing with Built-in Spacers

Kit14048


Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 7 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 8 Skateboard Extended Bearings August 16, 2021
Reviewer: Dino Rodrigues from Castroville, TX United States  
Excellent! As Described

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Quality Bearings October 27, 2020
Reviewer: DANILO ROQUE from San Diego, CA United States  
Good spin. Just quality.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 January 29, 2019
Reviewer: Anthony Ferell from Los Alamos, NM United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 No spacers needed April 5, 2014
Reviewer: Purple Shredder from Hutto, Texas  
If only more people knew that bearings are designed to run with the inner race stationary  they would always use spacers or bearings of this design.  Work perfectly as long as the wheels are true.  If the bearing seat is out of alignment or the seats are too far apart  you will still have trouble.  There are several popular brands that have terrific formulas but the bearing seats are whack.  Best used with wheels that are properly moulded.  Have had good luck with core wheels.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Good balls Dim. March 17, 2014
Reviewer: Dmitriy from Russian Federation, Moscow  
Good balls

Was this review helpful to you?

View All Customer Reviews