About Us |
My Account |
7204CYDUP4 Nachi high precision
Angular pair of Ball Bearings with 15 degrees contact
angle and Polyamide resin cage, pair of ball bearings
is 2 duplex bearings, bearings are ABEC-7 (P4) quality
and made in Japan.
The raceways of both the inner and outer rings of this bearing
type are made with a set contact angle. These bearings are
non-separable. Since the balls are inserted utilizing
counter-bore construction, a larger number of balls can be
installed than in the case of Deep-groove ball bearings. Standard
cage materials may be pressed steel, high-strength brass, or
synthetic resin. Cage material is dependent on the bearing series
and or service condition.
Back to top