Home > Bearing By Types > Bearings by Brand > NACHI-FUJIKOSHI CORP. Bearings | Authorized Distributor >

7010CYDUP4 Nachi Angular Contact Bearing 50x80x16 Abec-7 Bearings
7010CYDUP4 Nachi Angular Contact Bearing 50x80x16 Abec-7 Bearings


 
Our Price: $423.37
. Item: 7010CYDUP4 Nachi Ball Bearings
. Type: Nachi Angular Ball Bearings
. Cage: Polyamide resin cage
. Quality: ABEC-7 (P4 quality)
. Dimensions: 50mm x 80mm x 16mm/Metric

Product Code: KIT10877
Qty:

Description
 
High Precision Ball Bearings
7010CYDUP4 Nachi Angular Ball Bearings
15 degrees Contact Angle
Abec-7
50mm x 80mm x 16mm
Made in Japan


7010CYDUP4
7010CYDUP4

7010CYDUP4 Nachi high precision Angular pair of Ball Bearings with 15 degrees contact angle and Polyamide resin cage, pair of ball bearings is 2 duplex bearings, bearings are ABEC-7 (P4) quality and made in Japan.

  • Item: 7010CYDUP4 Nachi Ball Bearings
  • Type: Nachi Angular Ball Bearings
  • Cage: Polyamide resin cage
  • Quality: ABEC-7 (P4 quality)
  • Dimensions: 50mm x 80mm x 16mm/Metric
  • ID (inner diameter)/Bore: 50mm
  • OD (outer diameter): 80mm
  • Width/Height/thickness: 16mm
  • Size: 50 x 80 x 16 mm
  • Quantity: Pair of Bearings
  • Dynamic load rating Cr: 42,500 N
  • Static load rating Cor: 44,000 N
  • Limiting Speed:
    • Grease Lubrication: 9,600 RPM
    • Oil Lubrication: 13,000 RPM
  • Made in Japan


Dimensions
d D B r r1 a
50mm 80mm 16mm 1mm 0.6mm -0.5mm

Nachi Single Row Angular Contact Bearing

The raceways of both the outer and inner rings of this posture kind are made out of a contact angle that was established. These claws are non-separable. A quantity of balls could be set up than in the instance of ball bearings, Considering that the balls are added using structure. Standard cage substances could possibly be scraped on high-strength metal, steel synthetic or resin. Cage substance depends upon the bearing support or series and requirement. Single-row Angular Contact ball bearings can sustain loads any load has to be in 1 direction. This posture type is utilized to deal with the load caused by the internal force created by the load that was applied. When mounting two bearings in adjacent places, NACHI supplies these mix components (pairs) together using pre-adjusted clearance. Mix bearings are places. Axial loads can be sustained by DB or DF sets.

Kit10877


Share your knowledge of this product. Be the first to write a review »