Nachi

7009CYDUP4 Nachi Angular Contact Bearing 45x75x16 Abec-7 Bearings

No reviews
$684.99
SKU: Kit10876
UPC: 00193019091746
Item: 7009CYDUP4 Nachi Ball Bearings
Type: Nachi Angular Ball Bearings
Cage: Polyamide resin cage
Quality: ABEC-7 (P4 quality)
Dimensions: 45mm x 75mm x 16mm/Metric
High Precision Ball Bearings
7009CYDUP4 Nachi Angular Ball Bearings
15 degrees Contact Angle
Abec-7
45mm x 75mm x 16mm
Made in Japan


7009CYDUP4 Nachi high precision Angular pair of Ball Bearings with 15 degrees contact angle and Polyamide resin cage, pair of ball bearings is 2 duplex bearings, bearings are ABEC-7 (P4) quality and made in Japan.

  • Item: 7009CYDUP4 Nachi Ball Bearings
  • Type: Nachi Angular Ball Bearings
  • Cage: Polyamide resin cage
  • Quality: ABEC-7 (P4 quality)
  • Dimensions: 45mm x 75mm x 16mm/Metric
  • ID (inner diameter)/Bore: 45mm
  • OD (outer diameter): 75mm
  • Width/Height/thickness: 16mm
  • Size: 45mm x 75mm x 16mm
  • Quantity: Pair of Bearings
  • Dynamic load rating Cr: 40,000 N
  • Static load rating Cor: 39,000 N
  • Limiting Speed:
    • Grease Lubrication: 10,000 RPM
    • Oil Lubrication: 14,000 RPM
  • Made in Japan


Dimensions
d D B r r1 a
45mm 75mm 16mm 1mm 0.6mm -1.1mm

The raceways of both the outer and inner rings of this set up kind are made out of a contact angle that was set. These bearings are non-separable. A number of balls can be installed than in the instance of ball bearings, Considering that the balls are added utilizing counter-bore structure. Standard cage substances could possibly be brushed on high-strength metal, steel artificial or resin. Cage substance depends upon the bearing support or series and requirement. Single-row Angular Contact ball bearings can sustain loads, however, any axial load must be in 1 direction. This bearing type is normally utilized to deal with the load caused by the axial force generated by the radial load that was applied. When mounting two bearings in adjacent positions, NACHI provides these mix components (pairs) with pre-adjusted clearance. Mix bearings are matched sets. Combination or paired bearings could be arranged BACK-TO-BACK (DB), FACE-TO-FACE (DF), or at TANDEM (DT). Bidirectional axial loads can be sustained by DF or DB sets.