About Us |
My Account |
7008CYDUP4 Nachi high precision Angular pair of Ball Bearings with 15 degrees contact angle and Polyamide resin cage, pair of ball bearings is 2 duplex bearings, bearings are ABEC-7 (P4) quality and made in Japan.
The raceways of both the outer and inner rings of this bearing kind are made with a set contact angle. These claws are non-separable. Considering that the balls are added using structure, a bigger number of balls can be set up than in the instance of ball bearings. Standard cage materials might be molded on high-strength brass steel artificial or resin. Cage material is dependent upon the bearing service or series and condition. Single-row Angular Contact ball bearings can sustain radial, axial or mix loads any load has to be in 1 direction. This bearing type is usually used to handle the triggered load resulting from the axial force generated by the load that was applied. When mounting two bearings in adjacent places, NACHI provides these mix components (pairs) using pre-adjusted clearance. Paired mix bearings are matched places. Bidirectional loads can be sustained by DF or DB sets.
Back to top