About Us |
My Account |
7007CYDUP4 Nachi is a high precision Angular contact pair of Ball Bearings with 15 degrees contact angle and Polyamide resin cage, pair of ball bearings is 2 duplex bearings, bearings are ABEC-7 (P4) quality and made in Japan.
The raceways of both the inner and outer rings of this bearing kind are made with a contact angle that was established. These bearings are non-separable. Because the balls are inserted utilizing construction, a bigger quantity of balls may be installed than in the case of ball bearings. Standard cage materials could possibly be pressed high-strength metal, steel artificial or resin. Cage material is dependent on the bearing series and or service requirement. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads any axial load has to be in one direction. This bearing type is normally utilised to handle the load caused by the axial force created by the load that was applied. When mounting two bearings in adjacent places, NACHI supplies these mix components (pairs) with pre-adjusted clearance. Combination bearings are paired places. Bidirectional axial loads can be sustained by DF or DB sets.
Back to top