About Us |
My Account |
7006CYDUP4 Nachi high precision
Angular pair of Ball Bearings with 15 degrees contact
angle and Polyamide resin cage, pair of ball bearings
is 2 duplex bearings, bearings are ABEC-7 (P4) quality
and made in Japan. inner diameter is
30mm, outer diameter is 55mm, width is 13mm.
The raceways of both the outer and inner rings of this posture kind are made out of a contact angle that was established. These claws are non-separable. A quantity of balls could be set up than in the instance of ball bearings, Considering that the balls are added using structure. Standard cage substances could possibly be scraped on high-strength metal, steel synthetic or resin. Cage substance depends upon the bearing support or series and requirement. Single-row Angular Contact ball bearings can sustain loads any load has to be in 1 direction. This posture type is utilized to deal with the load caused by the internal force created by the load that was applied. When mounting two bearings in adjacent places, NACHI supplies these mix components (pairs) together using pre-adjusted clearance. Mix bearings are places. Axial loads can be sustained by DB or DF sets.
Back to top