Home > Metric Bearings > 30mm inner diameter Bearings >

7006CYDUP4 Nachi Angular Contact Bearing 30x55x13 Abec-7 Bearings
7006CYDUP4 Nachi Angular Contact Bearing 30x55x13 Abec-7 Bearings


 
Our Price: $293.37
. Item: 7006CYDUP4 Angular Ball Bearings
. Type: Nachi Angular Ball Bearings
. Cage: Polyamide resin cage
. Quality: ABEC-7 (P4 quality)
. Dimensions: 30mm x 55mm x 13mm/Metric

Product Code: KIT10873
Qty:

Description
 
High Precision Ball Bearings
7006CYDUP4 Nachi Angular Ball Bearings
15 degrees Contact Angle
Abec-7
30mm x 55mm x 13mm
Made in Japan


7006CYDUP4
7006CYDUP4
7006CYDUP4

7006CYDUP4 Nachi high precision Angular pair of Ball Bearings with 15 degrees contact angle and Polyamide resin cage, pair of ball bearings is 2 duplex bearings, bearings are ABEC-7 (P4) quality and made in Japan. inner diameter is 30mm, outer diameter is 55mm, width is 13mm.

  • Item: 7006CYDUP4 Angular Ball Bearings
  • Type: Nachi Angular Ball Bearings
  • Cage: Polyamide resin cage
  • Quality: ABEC-7 (P4 quality)
  • Dimensions: 30mm x 55mm x 13mm/Metric
  • ID (inner diameter)/Bore: 30mm
  • OD (outer diameter): 55mm
  • Width/Height/thickness: 13mm
  • Size: 30 x 55 x 13 mm
  • Quantity: Pair of Bearings
  • Dynamic load rating Cr: 25,900 N
  • Static load rating Cor: 24,000 N
  • Limiting Speed:
    • Grease Lubrication: 15,000 RPM
    • Oil Lubrication: 21,000 RPM
  • Made in Japan
Dimensions
d D B r r1 a
30mm 55mm 13mm 1mm 0.6mm -1.6mm

Nachi Single Row Angular Contact Bearing

The raceways of both the outer and inner rings of this posture kind are made out of a contact angle that was established. These claws are non-separable. A quantity of balls could be set up than in the instance of ball bearings, Considering that the balls are added using structure. Standard cage substances could possibly be scraped on high-strength metal, steel synthetic or resin. Cage substance depends upon the bearing support or series and requirement. Single-row Angular Contact ball bearings can sustain loads any load has to be in 1 direction. This posture type is utilized to deal with the load caused by the internal force created by the load that was applied. When mounting two bearings in adjacent places, NACHI supplies these mix components (pairs) together using pre-adjusted clearance. Mix bearings are places. Axial loads can be sustained by DB or DF sets.

Kit10873


Share your knowledge of this product. Be the first to write a review »