Nachi

7002CYDUP4 Nachi Angular Contact Bearing 15x32x9 Abec-7 Japan Bearings

No reviews
$333.99
SKU: Kit10869
UPC: 00193019091678
Item: 7002CYDUP4 Nachi Ball Bearings
Type: Nachi Angular Ball Bearings
Cage: Polyamide resin cage
Quality: ABEC-7 (P4 quality)
Dimensions: 15mm x 32mm x 9mm/Metric
High Precision Ball Bearings
7002CYDUP4 Nachi Angular Ball Bearings
15 degrees Contact Angle
Abec-7
15mm x 32mm x 9mm
Made in Japan


7002CYDUP4 Nachi high precision Angular pair of Ball Bearings with 15 degrees contact angle and Polyamide resin cage, pair of ball bearings is 2 duplex bearings, bearings are ABEC-7 (P4) quality and made in Japan.

  • Item: 7002CYDUP4 Nachi Ball Bearings
  • Type: Nachi Angular Ball Bearings
  • Cage: Polyamide resin cage
  • Quality: ABEC-7 (P4 quality)
  • Dimensions: 15mm x 32mm x 9mm/Metric
  • ID (inner diameter)/Bore: 15mm
  • OD (outer diameter): 32mm
  • Width/Height/thickness: 9mm
  • Size: 15 x 32 x 9 mm
  • Quantity: Pair of Bearings
  • Made in Japan


Dimensions
d D B r r1 a
15mm 32mm 9mm 0.3mm 0.15mm -1.8mm
The raceways of both the outer and inner rings of this set up kind are made out of a contact angle that was established. These claws are non-separable. A quantity of balls could be set up than in the event of ball bearings Because the balls are added using structure. Standard cage substances could be brushed high-strength metal, steel artificial or resin. Cage substance depends upon the bearing support or series and requirement. Single-row Angular Contact ball bearings can sustain loads any load has to be in 1 direction. This posture type is utilized to deal with the load caused by the axial force created by the load that was applied. When mounting two bearings in adjacent places, NACHI supplies these mix components (pairs) together using pre-adjusted clearance. Mix bearings are places. Axial loads can be sustained by DB or DF sets.