About Us |
My Account |
7001CYDUP4 Nachi high precision Angular pair of Ball Bearings with 15 degrees contact angle and Polyamide resin cage, pair of ball bearings is 2 duplex bearings, bearings are ABEC-7 (P4) quality and made in Japan.
The raceways of both the inner and outer rings of this set up type are made with a contact angle that was set. These claws are non-separable. Since the balls are inserted utilizing structure, a larger number of balls may be installed than in the case of ball bearings. Standard cage substances may be pressed on steelbrass , or artificial resin. Cage material depends upon the bearing service or series and condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, but any load has to be in one direction. This posture type is generally utilised to deal with the load resulting from the internal axial force created by the applied radial load. When mounting two single bearings in adjacent positions, NACHI supplies these mix components (pairs) with pre-adjusted clearance. Paired combination bearings are paired sets. Bidirectional axial loads can be sustained by DB or DF sets.
Back to top