Nachi

6908 Nachi Bearing Open Japan 40x62x12

$45.99
SKU: Kit14443
UPC: 00193019099155
Item: 6908 Nachi Ball Bearing
Type: Nachi Deep groove Ball Bearing
Dimensions: 40mm x 62mm x 12mm/Metric
ID (inner diameter)/Bore: 40mm
OD (outer diameter): 62mm
6908 Nachi Open Ball Bearing
40mm x 62mm x 12mm
Made in Japan


6908 Nachi Bearing, the 6908 inner diameter is 40mm, the 6908 outer diameter is 62mm, 6908 width is 9mm.

  • Item: 6908 Nachi Ball Bearing
  • Type: Nachi Deep groove Ball Bearing
  • Dimensions: 40mm x 62mm x 12mm/Metric
  • ID (inner diameter)/Bore: 40mm
  • OD (outer diameter): 62mm
  • Width/Height/thickness: 12mm
  • Size: 40 x 62 x 12 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 13,700 N
  • Static load rating Cor: 9,950 N
  • Limiting Speed:
    • Grease Lubrication: 11,000 RPM
    • Oil Lubrication: 13,000 RPM
  • Made in Japan

Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.