Home > Metric Bearings > 30mm inner diameter Bearings >

6306-2RS Bearing 30x72x19 Sealed
6306-2RS Bearing 30x72x19 Sealed


 
Our Price: $10.37
. Item: 6306-2RS ball bearing
. Type: Deep groove radial ball bearing
. Cage: Steel
. Balls: Chrome Steel
. Radial Clearance: C0

Product Code: 6306-2RS
Qty:

Description
 
6306-2RS Sealed Ball Bearing
30mm x 72mm x 19mm


"6306-2RS

6306-2RS Sealed Ball Bearing is radial, deep groove ball bearing,6306-2RS bearing is made of Chrome Steel with chrome steel balls and steel cage, bearing is closed with rubber seals to protect the bearing from dust or any possible contamination,6306-2RS bearing is sealed and self lubricated,the quality is set to EMQ (electric motor quality),6306-2RS bearing is lubricated with grease.

  • Item: 6306-2RS ball bearing
  • Type: Deep groove radial ball bearing
  • Cage: Steel
  • Balls: Chrome Steel
  • Radial Clearance: C0
  • Material: Chrome Steel
  • Quality: Electric motor quality
  • Lubrication: Self Lubricated (Grease) Bearing
  • Closures: Double sealed with rubber seals RS/RS1/2RS1
  • Dimensions: 30mm x 72mm x 19mm/Metric
  • ID (inner diameter)/Bore: 30mm
  • OD (outer diameter): 72mm
  • Width/Height/thickness: 19mm
  • Size: 30 x 72 x 19 mm
  • Dynamic load rating Cr: 26,700 N
  • Static load rating Cor: 15,000 N
  • Limiting Speed:
    • Grease Lubrication: 6,700 RPM
  • Quantity: One Bearing
  • Equivalents: 6306RS, 6306-2RZ and 6306-2RS1 Bearings

6306-2RS Bearing 30x72x19 Sealed


6306-2RS

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 8 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 washing machine bearing replacment June 18, 2014
Reviewer: Big D from Detriot Michigan  
Being able to buy these bearings saved me hundreds of dollars.And 2yrs. later there better than the original.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 bearing purchas August 11, 2013
Reviewer: woody  
Installed this bearing into a kenmore frontload washer and its been working great.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great product May 6, 2013
Reviewer: Mark Hypes from Columbus Ohio  
Product is performing as expected. Fit was perfect. Fast shipping from company.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Your product and delivery was great! June 25, 2012
Reviewer: Wife of all trades  
The product was just what I needed and worked wonderfully.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Little more lubrication may help. March 4, 2012
Reviewer: S Singh from Parma, OH  
I had ordered these 6306-2RS Bearing (30x72x19 Sealed Ball Bearing) and 6307-2RS Bearing (35x80x21 Sealed Ball Bearing) from VXB.com through [@] for my Kenmore front loader washer model # 41744042400. I had to replace these bearings along with the inner basket (Sears part # 131618500) and Metric Oil Shaft Seal 40 x 80 x 10 40x80x10 Double Lip. Now since I was working on my washing machine by myself I had time and wanted to make sure that I should get years of trouble free service from my washing machine and that I don't have to do it all over again any time soon. Since bearings rotate at high speed so to reduce friction for their longer life  a good greased lubrication is a must. I pry opened the Seals of these bearings from the inner circle with 2-3 mm flat screw driver. There were about 4-5 drops of grease on only one side inside each of these bearings which is expected to lubricate the bearing when it spins. I washed the bearings with hot running water  wiped and dried them. Then I picked up "Super Tech Marine Grease" from [@]. As per the manufacturer of the Super Tech Marine Grease "Super Tech Marine Grease is a state-of-the-art lithium complex grease. This tacky grease resists water washout even under the most severe saltwater conditions. It offers superior protection against rust  corrosion  and oxidation."I filled up these bearings with Marine Grease and for those who are replacing bearings on their washing machine I would recommend them to fill same grease in the empty space in between the bearing and the outer lip seal as this way water or moisture can not make their way towards bearings.For those who are replacing the inner rotating drums of their front loader washer because of broken spider. I would recommend them to remove the spider from new drum  wash it with soapy water remove any oils then spray paint it with Rust-Oleum primer and paint. The hole for screw that holds the spider  the spider and the screw all are tapered so there are no chances of misalignment when putting these back together.I had installed these bearings in 11   2011 and do about 4-5 loads of laundry a week. I am going to update if as and when these bearings fail. But with this proper lubrication I expect them to last for kind of forever :-)

Was this review helpful to you?

View All Customer Reviews