Nachi
6301-2NSE Nachi Bearing 12x37x12 Sealed C3 Japan
UPC: 00193019103593
Type: Nachi Deep Groove Ball Bearing
Radial Clearance: C3
Closures: Double sealed rubber seals RS/RS1/2RS1
Dimensions: 12mm x 37mm x 12mm/Metric
6301-2NSE Nachi Ball Bearing 12mm x 37mm x 12mm Made in Japan |
6301-2NSE Nachi Bearing, Made in Japan, the 6301-2NSE inner diameter is 12mm, the 6301-2NSE outer diameter is 37mm, 6301-2NSE width is 12mm.
|
Excellent Protection and Smooth Operation The combination of a unique lip design and seal groove provides a labrinth and steady seal contact.Breathing mechanism avoids torque increases caused byinternal pressure variation due to changes in operating temperatures.NSE seals allow NACHI bearings to have constant smooth operation and long service life. Rings and balls made of select material have superbly controlled accuracy such as roundness, contour,surface finish, and hardness to provide quieter operation, reduced vibration levels, and long life.Rivet-type pressed steel cages for strength and durability.High-performance grease for long life and low noise. |
These bearing were used to replace two idler bearings in the alternator tensioner pulley in a 2001 Nissan Pathfinder.
use to replace worn out bearings in auto ilder belt pulleys this parts cost 80% less than buying new pulleys.
I used these bearings for a custom belt tensioner on an early type Delta 14" wood/metal bandsaw. Nachi bearings are great quality for a very fair price. They're all I buy for any of my machinery rebuilds anymore.
Bearings are great price but shipping needs to match prices somewhat. I shipped same bearing to Hawaii for 1 4 the price and you could too.