Home > View All > Metric Miniature Bearings > 10mm inner diameter Bearings >

6200-2NSE Nachi Bearing 10x30x9 Sealed C3 Japan
6200-2NSE Nachi Bearing 10x30x9 Sealed C3 Japan
6200-2NSE Nachi Bearing 10x30x9 Sealed C3 Japan
 
Our Price: $7.88
. Item: 6200-2NSE Nachi Ball Bearing
. Type: Nachi Deep groove Ball Bearing
. Radial Clearance: C3
. Closures: Double sealed rubber seals RS/RS1/2RS1
. Dimensions: 10mm x 30mm x 9mm/Metric

Product Code: KIT9701
Qty:

Description
 
6200-2NSE Nachi Bearing
10mm x 30mm x 9mm
Made in Japan



6200-2NSE Nachi Bearing, Made in Japan, the 6200-2NSE inner diameter is 10mm, the 6200-2NSE outer diameter is 30mm, 6200-2NSE width is 9mm.

  • Item: 6200-2NSE Nachi Ball Bearing
  • Type: Nachi Deep groove Ball Bearing
  • Radial Clearance: C3
  • Closures: Double sealed rubber seals RS/RS1/2RS1
  • Dimensions: 10mm x 30mm x 9mm/Metric
  • Bearing Inner Diameter: 10mm
  • Bearing Outer Diameter: 30mm
  • Bearing Width: 9mm
  • Size: 10 x 30 x 9 mm
  • Dynamic load rating Cr: 5,100 N
  • Static load rating Cor: 2,390 N
  • Limiting Speed:
    • Grease Lubrication: 18,000 RPM
  • Made in Japan
  • Quantity: One Bearing
  • Equal: 6200 RS / 6200 2RS


Advanced Seal Design Provides
Excellent Protection and Smooth Operation
The combination of a unique lip design and seal groove provides a labrinth and steady seal contact.Breathing mechanism avoids torque increases caused byinternal pressure variation due to changes in operating temperatures.NSE seals allow NACHI bearings to have constant smooth operation and long service life.

  • Superior in Sealing Out Dust, Dirt, and Contamination
  • Superb Grease Retention
  • Light Torque
    The Best Components Yield the Greatest Bearing Performance
    Rings and balls made of select material have superbly controlled accuracy such as roundness, contour,surface finish, and hardness to provide quieter operation, reduced vibration levels, and long life.Rivet-type pressed steel cages for strength and durability.High-performance grease for long life and low noise.

    • 6200-2NSE Nachi Bearing 10x30x9 Sealed C3 Japan

    Kit9701

    Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 14 Write a review »

      0 of 0 people found the following review helpful:
     
    5 of 5 Quality bearing, fast shipping March 10, 2021
    Reviewer: Adam from San Ramon, CA  
    This bearing is clearly a high quality component.  It's well sealed, and it comes packaged well.  So far the performance on my table saw armature has been good.  I am confident this bearing will last for years in this application.

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
     
    5 of 5 Good product good price March 24, 2015
    Reviewer: jjo  
    Product arrived promptly. Solved a problem with my Bosch table saw.

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
     
    5 of 5 Exact fit on 30 March 17, 2015
    Reviewer: Distinguishe Eagle Scout  
    The bearings came in on time  and I had to make a new hub out of high strength steel to accomidate the High Speed Dual Sided Garden Windmill with a 31" diamater. These bearings fit the new two sided shaft perfectly. This unit produces tremendous tourque under winds up to 40mph. In the past the factory bearings would not hold up and I had to rebuild the unit. Now it works perfect.

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
     
    5 of 5 Very good service and value December 9, 2014
    Reviewer: Clay from Remus, Michigan  
    Porduct was as discribe and fit perfectly.

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
     
    5 of 5 quality product shipped quickly April 22, 2014
    Reviewer: captainSpaulding  
    saw a review recommending this site because they had quality bearing replacements for my bosch table saw. turns out they were no more expensive than other suppliers.

    Was this review helpful to you?

    View All Customer Reviews