 |
5210 Nachi Double Row Angular Ball Bearing
50mm x 90mm x 30.2mm
Made in Japan
|
|
|
5210 Nachi Double Row Angular Ball Bearing, Made in Japan, inner diameter is 50mm, outer diameter is 90mm and width is 30.2mm.
- Item: 5210 Ball Bearing
- Type: Nachi Double Row Angular Ball Bearing
- Closures: Open
- Dimensions: 50mm x 90mm x 30.2mm/Metric
- ID (inner diameter)/Bore: 50mm
- OD (outer diameter): 90mm
- Width/Height/thickness: 30.2mm
- Size: 50 x 90 x 30.2 mm
- Quantity: One Bearing
- Dynamic load rating Cr: 54,500 N
- Static load rating Cor: 44,500 N
- Limiting Speed:
- Grease Lubrication: 5,000 RPM
- Oil Lubrication: 6,700 RPM
- Made in Japan
|
Nachi Double Row Angular Contact Bearing
The construction of this type ball bearing is similar to the adjacent, BACK-TO-BACK mounting of two Single-row Angular Contact ball bearings. Because fewer balls can be inserted per row compared to Single-row Angular Contact ball bearings, a Double-row Angular Contact ball bearing will have less load capacity than an equivalent size/series BACK-TO-BACK set of two Single-row Angular Contact ball bearings. This bearing type can sustain radial, moment and bi-directional axial loads.
Kit13508
|
|
|
