 |
5209 Nachi Angular Ball Bearing 45mm x 85mm x 30.2mm Made in Japan |
| 5209 Nachi Double Row Angular Ball Bearing, Made in Japan, inner diameter is 45mm, outer diameter is 85mm and width is 30.2mm. - Item: 5209 Nachi Ball Bearing
- Type: Nachi Double Row Angular Ball Bearing
- Closures: Open
- Dimensions: 45mm x 85mm x 30.2mm/Metric
- ID (inner diameter)/Bore: 45mm
- OD (outer diameter): 85mm
- Width/Height/thickness: 30.2mm
- Size: 45 x 85 x 30.2 mm
- Quantity: One Bearing
- Dynamic load rating Cr: 51,000 N
- Static load rating Cor: 39,000 N
- Limiting Speed:
- Grease Lubrication: 5,500 RPM
- Oil Lubrication: 7,500 RPM
- Made in Japan
| Nachi Double Row Angular Contact Bearing The construction of this type ball bearing is similar to the adjacent, BACK-TO-BACK mounting of two Single-row Angular Contact ball bearings. Because fewer balls can be inserted per row compared to Single-row Angular Contact ball bearings, a Double-row Angular Contact ball bearing will have less load capacity than an equivalent size/series BACK-TO-BACK set of two Single-row Angular Contact ball bearings. This bearing type can sustain radial, moment and bi-directional axial loads. Kit10051
|
|
 |