Home > Inch (imperial) Bearings > 3/16" inner diameter = 0.188 inch >

50 Bearing R3ZZ 3/16"x1/2"x0.196" inch Shielded Miniature Bearings
50 Bearing R3ZZ 3/16"x1/2"x0.196" inch Shielded Miniature Bearings


 
Our Price: $59.37
. Dimensions: 3/16inch x 1/2inch x 0.196inch English Size
. ID (inner diameter)/Bore= 0.187inch
. OD (outer diameter)= 0.500inch
. Width/Height/thickness= 0.196inch
. Equal: R3-ZZ &R3-2Z

Product Code: KIT320
Qty:

Description
 

Ball Bearings 3/16" x 1/2" R3ZZ
Metal Bearings
Lot of 50 Bearings

"50
"50
Lot of 50 bearings Ball Bearings size 3/16" x 1/2" x 0.1960", Metal Bearings 0.1875" x 0.5000" x 0.1960", this is a popular size that could be used in many Radio Control Cars and trucks, anything that uses this size 3/16" x 1/2" x 0.1960", Bearings are packed 10 bearings in one plastic tube.

Bearings are made of Chrome Steel and can rotate up to 42000 rpm, each bearing has 2 metal shields to protect the bearing from dust or any possible contamination, also bearings are pre-lubricated with grease.

  • Dimensions: 3/16inch x 1/2inch x 0.196inch English Size
  • ID (inner diameter)/Bore= 0.187inch
  • OD (outer diameter)= 0.500inch
  • Width/Height/thickness= 0.196inch
  • Equal: R3-ZZ &R3-2Z
  • Item: Ball Bearings
  • Size: 3/16" x 1/2" x 0.1960" inch
  • Type: Deep groove ball bearings
  • Closures: Metal Shileded
  • Lubrication: Self Lubricated (Grease)
  • Quantity: 50 Bearings R3ZZ
  • Packing: 50 bearings in 5 plastic tubes

50 Bearing R3ZZ 3/16"x1/2"x0.196" inch Shielded Miniature Bearings

Kit320

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 2 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Exactly what I needed January 19, 2013
Reviewer: Nateofark from Heber Springs, AR  
I am building fishing rod wrapping machines and needed small bearings to fit the wheel's I bought to support hold the fishing rod blanks for wrapping drying.  The .500 O.D. X .1875 I.D. X .196 thickness was exactly what I was looking for. I was not expecting them be so well made for what I paid for them.  I am going to use some more of these bearings for a steady rest for my micro lathe.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 GREAT SELECTION October 26, 2010
Reviewer: jzak3 from Germantown WI  
I would recommend this company on the people prices and selection.

Was this review helpful to you?