10 Slot Car Flanged Shielded Bearing 1/8"x1/4" inch Miniature Bearings

10 Slot Car Flanged Shielded Bearing 1/8"x1/4" inch Miniature Bearings

VXB
5 Reviews
$19.95
  • .: Item: 1/8" Slot Car Axle Flanged Shielded Ball Bearings
  • .: Type: Flanged Deep Groove Ball Bearings
  • .: Closures: 2 Metal Shields
  • .: Lubrication: Self Lubricated (Grease)
  • .: Dimensions: 1/8" x 1/4" English Size
Product Code: SCB1-8

Description

1/8" Slot Car Axle Flanged Shielded Ball Bearings
Lot of 10 Bearings


10 Slot Car Flanged Bearing 1/8x1/4 Shielded:vxb:Ball Bearings
1/8" Slot Car Axle Flanged Shielded Ball Bearings, size is 1/8" x 1/4", bearings are made from Chrome Steel, each bearing has 2 metal shields to protect the bearing from dust or any possible contamination, also bearings are pre-lubricated with grease.

  • Item: 1/8" Slot Car Axle Flanged Shielded Ball Bearings
  • Type: Flanged Deep Groove Ball Bearings
  • Closures: 2 Metal Shields
  • Lubrication: Self Lubricated (Grease)
  • Dimensions: 1/8" x 1/4" English Size
  • Bearing Inner Diameter: 1/8" inch
  • Bearing Outer Diameter: 1/4" inch
  • Quantity: 10 Bearings
  • Dynamic load rating: 64 LBS
  • Static load rating: 22 LBS
  • Packing: 10 bearings in One plastic tube

10 Slot Car Flanged Shielded Bearing 1/8"x1/4" inch Miniature Bearings


SCB1-8

Reviews

Average Rating:
( 5 )
Alan Draht from Chicago, IL United States
July 16, 2019
Ten (10) 1/8 inch ID flanged ball bearings
Excellent product, terrific value, fast shipping, superlative customer service. VXB rocks!!
Was this review helpful to you?
Cheryl Dixon from Cottage Grove, MN United States
July 1, 2019
Was this review helpful to you?
metalsun from Sun City, CA.
December 9, 2012
good product
Bearings are exactly 1 8" in dia. so wouldn't fit on my 1 8" rods without some fine work.
Was this review helpful to you?
Bill from Weymouth, MA
November 3, 2012
Racing With VXB Bearings
I used these bearings to replace the bronze bushings in the trigger in the controller I use for HO slot car racing. These bearings provided a nice tight fit with no 'play' or sloppiness as well as very smooth and resistance free travel in the trigger. One of the benefits of using these bearings is that they are a direct fit with no modifications needed to use them in this application.
Was this review helpful to you?
Tom L from San Jose, CA
August 1, 2011
Low Cost Bearing
Good robust 1 4 OD 1 8" ID Flanged bearing for electronic mechanism with low load.
Was this review helpful to you?