10 Shielded Bearing R1810ZZ 5/16x1/2x5/32 inch Miniature Bearings - VXB Ball Bearings
10 Shielded Bearing R1810ZZ 5/16x1/2x5/32 inch Miniature Bearings - VXB Ball Bearings
10 Shielded Bearing R1810ZZ 5/16x1/2x5/32 inch Miniature Bearings - VXB Ball Bearings
10 Shielded Bearing R1810ZZ 5/16x1/2x5/32 inch Miniature Bearings - VXB Ball Bearings
10 Shielded Bearing R1810ZZ 5/16x1/2x5/32 inch Miniature Bearings - VXB Ball Bearings
10 Shielded Bearing R1810ZZ 5/16x1/2x5/32 inch Miniature Bearings - VXB Ball Bearings

VXB

10 Shielded Bearing R1810ZZ 5/16x1/2x5/32 inch Miniature Bearings

$54.99
SKU: R1810ZZ
UPC: 00193019010303
Item: R1810ZZ Ball Bearings
Type: Deep Groove Ball Bearings
Dimensions: 5/16" inch x 1/2" inch x 5/32" inch English Size
Bearing Inner Diameter: 5/16" inch
Bearing Outer Diameter: 1/2" inch
R1810ZZ Shielded Ball Bearings
5/16" x 1/2" x 5/32" inch
10 Bearings


R1810ZZ Shielded Ball Bearings, Bearing inner diameter is 5/16" Inch, Bearing outer diameter is 1/2" Inch and Bearing width is 5/32" Inch, each bearing has 2 metal shields to protect the bearing from dust or any possible contamination, also bearings are pre-lubricated with grease.

  • Item: R1810ZZ Ball Bearings
  • Type: Deep Groove Ball Bearings
  • Dimensions: 5/16" inch x 1/2" inch x 5/32" inch English Size
  • Bearing Inner Diameter: 5/16" inch
  • Bearing Outer Diameter: 1/2" inch
  • Bearing Width: 5/32" inch
  • Size: 7.9375mm x 12.70mm x 3.9675mm
  • Closures: 2 Metal Shields
  • Lubrication: Self Lubricated (Grease)
  • Quantity: 10 Bearings
  • Dynamic load rating Cr: 0.57 KN
  • Static load rating Cor: 0.3 KN
  • Limiting Speed:
    • Grease Lubrication: 47,000 RPM
  • Equal: R1810-2Z &R1810-ZZ


Share

Facebook X (Twitter) Pinterest

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
P
Panelmaker
I ordered from VXB before I will again.

I used my order to replace bearings in a small fan.

F
FSG Machine Works
R1810ZZ sweet!

I used these bearings in a shake testing instrument. They run quietly and are rugged enough to take a good deal of shock without damage. The small size makes them easy to integrate into compact assemblies.

D
DBT
I expect to keep using these.

These little bearings do a great job for me. I use them as con-rod bearings on a small (1 3 hp) steam engine stacking them three wide and they hold up better than I expected. I'm getting around 40 50 hrs out of them depending on load rpm's.