S6205-2RS Stainless Steel Sealed Bearing 25x52x15 - VXB Ball Bearings
S6205-2RS Stainless Steel Sealed Bearing 25x52x15 - VXB Ball Bearings
S6205-2RS Stainless Steel Sealed Bearing 25x52x15 - VXB Ball Bearings
S6205-2RS Stainless Steel Sealed Bearing 25x52x15 - VXB Ball Bearings
S6205-2RS Stainless Steel Sealed Bearing 25x52x15 - VXB Ball Bearings
S6205-2RS Stainless Steel Sealed Bearing 25x52x15 - VXB Ball Bearings

VXB

S6205-2RS Stainless Steel Sealed Bearing 25x52x15

$39.99
SKU: Kit8985
UPC: 00193019047170
Item: S6205-2RS Ball Bearing
Type: Deep groove radial ball bearing
Material: Stainless Steel
Cage: Stainless Steel
Closures: Double sealed with rubber seals RS/RS1/2RS1
S6205-2RS Stainless Steel Ball Bearing
Sealed Bearing
25mm x 52mm x15mm

S6205-2RS is Double sealed, radial and deep groove ball bearing,S6205-2RS bearing is made of Stainless Steel and Stainless steel cage,bearing is closed with rubber seals to protect the bearing from dust or any possible contamination,bearing is sealed and self lubricated, bearing is lubricated with grease.

  • Item: S6205-2RS Ball Bearing
  • Type: Deep groove radial ball bearing
  • Material: Stainless Steel
  • Cage: Stainless Steel
  • Closures: Double sealed with rubber seals RS/RS1/2RS1
  • Lubrication: Self Lubricated (Grease) Bearing
  • Dimensions: 25mm x 52mm x 15mm/Metric
  • ID (inner diameter)/Bore: 25mm
  • OD (outer diameter): 52mm
  • Width/Height/thickness: 15mm
  • Size: 25 x 52 x 15 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 14,000 N
  • Static load rating Cor: 7,900 N
  • Limiting Speed:
    • Grease Lubrication: 9,000 RPM
  • Equal: 6205-2RS1 & 6205-2RZ
  • Equivalents: S6205RS Bearing


Share

Facebook X (Twitter) Pinterest

Customer Reviews

Based on 4 reviews
75%
(3)
0%
(0)
25%
(1)
0%
(0)
0%
(0)
P
Phil B.
Customer review

Great service good postge speed to Australia

H
Handyman
Solid product

Produst was exactly as described.

Z
Z
Decent bearings but a bit noisy

I purchased this bearing as a replacement for a shaft bearing on an electric motor in a dust collector that had rusted due to exposure to moisture in use. Finding a stainless steel bearing was a great plus so I would not have to worry about the replacement rusting. However once installed the bearing caused the motor to HOWL when running and was noticeably warmer. Luckily the noise from the blower is much louder than the bearing so the bearing noise is masked during operation but is still there. Bottom line if you need a bearing for an electric motor find one that is rated EMQ for electric motor quality. There really is a difference.

r
repairs
Worked perfect

Needed a replacement bearing for a meat slicer. The size was written on the side of the original bearing so I googled it and found this listing. The bearings sent were high quality and fit exactly. If your size numbers match this title you can trust this listing to be correct.