Nachi

6224 Nachi Bearing Open C3 Japan 120x215x40 Large

No reviews
$423.99
SKU: Kit9855
UPC: 00193019104798
Item: 6224 Nachi Ball Bearing
Type: Nachi Deep groove Ball Bearing
Radial Clearance: C3
Dimensions: 120mm x 215mm x 40mm/Metric
ID (inner diameter)/Bore: 120mm
6224 Nachi Bearing
120mm x 215mm x 40mm
Made in Japan


6224 Nachi Bearing, Made in Japan, the 6224 inner diameter is 120mm, the 6224 outer diameter is 215mm, 6224 width is 40mm.

  • Item: 6224 Nachi Ball Bearing
  • Type: Nachi Deep groove Ball Bearing
  • Radial Clearance: C3
  • Dimensions: 120mm x 215mm x 40mm/Metric
  • ID (inner diameter)/Bore: 120mm
  • OD (outer diameter): 215mm
  • Width/Height/thickness: 40mm
  • Size: 120 x 215 x 40 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 145,000 N
  • Static load rating Cor: 118,000 N
  • Limiting Speed:
    • Grease Lubrication: 2,900 RPM
    • Oil Lubrication: 3,400 RPM
  • Made in Japan

Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.