6200-2NSE Nachi Bearing 10x30x9 Sealed C3 Japan - VXB Ball Bearings

Nachi

6200-2NSE Nachi Bearing 10x30x9 Sealed C3 Japan

$19.99
SKU: Kit9701
UPC: 00193019103340
Item: 6200-2NSE Nachi Ball Bearing
Type: Nachi Deep groove Ball Bearing
Radial Clearance: C3
Closures: Double sealed rubber seals RS/RS1/2RS1
Dimensions: 10mm x 30mm x 9mm/Metric
6200-2NSE Nachi Bearing
10mm x 30mm x 9mm
Made in Japan

6200-2NSE Nachi Bearing, Made in Japan, the 6200-2NSE inner diameter is 10mm, the 6200-2NSE outer diameter is 30mm, 6200-2NSE width is 9mm.

  • Item: 6200-2NSE Nachi Ball Bearing
  • Type: Nachi Deep groove Ball Bearing
  • Radial Clearance: C3
  • Closures: Double sealed rubber seals RS/RS1/2RS1
  • Dimensions: 10mm x 30mm x 9mm/Metric
  • Bearing Inner Diameter: 10mm
  • Bearing Outer Diameter: 30mm
  • Bearing Width: 9mm
  • Size: 10 x 30 x 9 mm
  • Dynamic load rating Cr: 5,100 N
  • Static load rating Cor: 2,390 N
  • Limiting Speed:
    • Grease Lubrication: 18,000 RPM
  • Made in Japan
  • Quantity: One Bearing
  • Equal: 6200 RS / 6200 2RS


Advanced Seal Design Provides
Excellent Protection and Smooth Operation
The combination of a unique lip design and seal groove provides a labrinth and steady seal contact.Breathing mechanism avoids torque increases caused byinternal pressure variation due to changes in operating temperatures.NSE seals allow NACHI bearings to have constant smooth operation and long service life.

  • Superior in Sealing Out Dust, Dirt, and Contamination
  • Superb Grease Retention
  • Light Torque
    The Best Components Yield the Greatest Bearing Performance
    Rings and balls made of select material have superbly controlled accuracy such as roundness, contour,surface finish, and hardness to provide quieter operation, reduced vibration levels, and long life.Rivet-type pressed steel cages for strength and durability.High-performance grease for long life and low noise.

    • Share

    Facebook X (Twitter) Pinterest

    Customer Reviews

    Based on 14 reviews
    93%
    (13)
    7%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    A
    Adam
    Quality bearing, fast shipping

    This bearing is clearly a high quality component. It's well sealed, and it comes packaged well. So far the performance on my table saw armature has been good. I am confident this bearing will last for years in this application.

    j
    jjo
    Good product good price

    Product arrived promptly. Solved a problem with my Bosch table saw.

    D
    Distinguishe E.S.
    Exact fit on 30

    The bearings came in on time and I had to make a new hub out of high strength steel to accomidate the High Speed Dual Sided Garden Windmill with a 31" diamater. These bearings fit the new two sided shaft perfectly. This unit produces tremendous tourque under winds up to 40mph. In the past the factory bearings would not hold up and I had to rebuild the unit. Now it works perfect.

    C
    Clay
    Very good service and value

    Porduct was as discribe and fit perfectly.

    c
    captainSpaulding
    quality product shipped quickly

    saw a review recommending this site because they had quality bearing replacements for my bosch table saw. turns out they were no more expensive than other suppliers.

    123