Nachi

7909CYU/GLP4 Nachi Angular Contact Bearing 45x68x12 Abec-7 Bearings

No reviews
$332.99
SKU: Kit10930
UPC: 00193019092118
Item: 7909CYU/GLP4 Nachi Ball Bearing
Type: Nachi Angular Ball Bearing
Cage: Phenolic cage
Quality: ABEC-7 (P4 quality)
Dimensions: 45mm x 68mm x 12mm/Metric
Super Precision Ball Bearing
7909CYU/GLP4 Nachi Angular Ball Bearing
Phenolic cage & Flush ground single unit
15 degrees Contact Angle
Abec-7
45mm x 68mm x 12mm
Made in Japan


7909CYU/GLP4 Nachi super precision Angular Ball Bearing with 15 degrees contact angle and Phenolic cage, bearing is ABEC-7 (P4) quality and made in Japan. 7909CYU/GLP4 inner diameter is 45mm, 7909CYU/GLP4 outer diameter is 68mm, 7909CYU/GLP4 width is 12mm.

  • Item: 7909CYU/GLP4 Nachi Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Phenolic cage
  • Quality: ABEC-7 (P4 quality)
  • Dimensions: 45mm x 68mm x 12mm/Metric
  • ID (inner diameter)/Bore: 45mm
  • OD (outer diameter): 68mm
  • Width/Height/thickness: 12mm
  • Size: 45 x 68 x 12 mm
  • Quantity: One Bearing
  • Made in Japan


Dimensions
d D B r r1
45mm 68mm 12mm 0.6mm 0.3mm

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.