(800) 928-4430
Help Desk Software
7314 Nachi Angular Contact Bearing C3 Japan 70x150x35 Bearings
    Close 7314 Nachi Angular Contact Bearing C3 Japan 70x150x35 Bearings

    7314 Nachi Angular Contact Bearing C3 Japan 70x150x35 Bearings

    Price: $127.37

    Code: Kit10038

    Product Descriptions

    7314 Nachi Angular Ball Bearing
    40 Contact Angle & Steel Cage
    70mm x 150mm x 35mm
    Made in Japan


    7314 Nachi Angular Ball Bearing
    7314 Nachi Angular Ball Bearing

    7314 Nachi Angular Ball Bearing, bearing is 40 Contact Angle, Steel Cage and Flush Ground, Made in Japan, inner diameter is 70mm, outer diameter is 150mm and width is 35mm.

    • Item: 7314 Nachi Ball Bearing
    • Type: Nachi Angular Ball Bearing
    • Cage: Steel Cage
    • Dimensions: 70mm x 150mm x 35mm/Metric
    • ID (inner diameter)/Bore: 70mm
    • OD (outer diameter): 150mm
    • Width/Height/thickness: 35mm
    • Size: 70 x 150 x 35 mm
    • Quantity: One Bearing
    • Dynamic load rating Cr: 125,000 N
    • Static load rating Cor: 94,000 N
    • Limiting Speed:
      • Grease Lubrication: 4,000 RPM
      • Oil Lubrication: 5,300 RPM
    • Made in Japan

    Nachi Single Row Angular Contact Bearing

    The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

    7314 Nachi Angular Contact Bearing C3 Japan 70x150x35 Bearings :: Kit10038 :: Single Row Angular Contact Bearings

    7314 Nachi Angular Contact Bearing C3 Japan 70x150x35 Bearings :: Kit10038 :: VXB Bearing :: Single Row Angular Contact Bearings

    *MARKER* 0