2x5 Shielded 2x5x2.3 Miniature Bearing Pack of 10 - VXB Ball Bearings
2x5 Shielded 2x5x2.3 Miniature Bearing Pack of 10 - VXB Ball Bearings

VXB

2x5 Shielded 2x5x2.3 Miniature Bearing Pack of 10

$46.99
SKU: Kit747
UPC: 00193019281178
Item: 2 x 5 x 2.3 Ball Bearings
Type: Deep Groove Ball Bearings
Closures: 2 Metal Shields
Lubrication: Self Lubricated (Grease)
Size: 2mm x 5mm x 2.3mm
2 x 5 x 2.3 Shielded Ball Bearings
Lot of 10 Bearings


2 x 5 x 2.3 Shielded Ball Bearings, Bearings are made of Chrome Steel, each bearing has 2 Metal Shield to protect the bearing from dust or any possible contamination, also bearings are pre-lubricated with grease.

  • Item: 2 x 5 x 2.3 Ball Bearings
  • Type: Deep Groove Ball Bearings
  • Closures: 2 Metal Shields
  • Lubrication: Self Lubricated (Grease)
  • Size: 2mm x 5mm x 2.3mm
  • Inner Diameter: 2mm
  • Outer Diameter: 5mm
  • Width: 2.3mm
  • Quantity: 10 Bearings
  • Dynamic load rating Cr: 190 N
  • Static load rating Cor: 60 N
  • Limiting Speed:
    • Grease Lubrication: 98,000 RPM
  • Packing: 10 bearings in One plastic tube
  • KOYO: W682ZZX
  • NSK: 682ZZ
  • NMB: L-520ZZ


Share

Facebook X (Twitter) Pinterest

Customer Reviews

Based on 5 reviews
60%
(3)
40%
(2)
0%
(0)
0%
(0)
0%
(0)
B
BoBo
parrot ar drone

Fits the parrot ar drone. I replaced the stock ones. Seems to work w The stock ones bent on me .... hopefully these will work better.

F
Frank f.W.S.
Works Great

Bearings made a marked improvement in the AR Drones performance

L
Larry
Great handling of product

Hard to find minature bearing size for use on an AR.DRONE quadracopter.

A
Aerospacer
Great upgrade bearings for AR. Drone

Although 0.3 mm wider than the prop shaft bushings they replace they work just as well as a narrower open ball bearing some others offer. The 10-pack is two more than needed but for the price they make good spares.

R
Robert
AR Drone Bearing Replacement

These bearings will replace the AR Drone brass bearings with no modifications as required with some other replacement bearings. The result is a prop assembly with less slop then original. I think the Drone runs quieter with these bearings.