6203NR Nachi Bearing With Snap Ring (C clip) 17mm x 40mm x 12mm Made in Japan

6203NR Nachi Bearing with a Snap Ring, Made in Japan. the 6203NR inner diameter is 17mm, the 6203NR outer diameter is 40mm, 6203NR width is 12mm. Item: 6203NR Nachi Ball Bearing Type: Nachi Deep groove Ball Bearings Radial Clearance: C3 Dimensions: 17mm x 40mm x 12mm/Metric ID (inner diameter)/Bore: 17mm OD (outer diameter): 40mm Width/Height/thickness: 12mm Size: 17mm x 40mm x 12mm Quantity: One Bearing Dynamic load rating Cr: 9,550 N Static load rating Cor: 4,800 N Limiting Speed: Grease Lubrication: 18,000 RPM Oil Lubrication: 21,000 RPM Made in Japan

Nachi Deep Groove Ball Bearings

Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a wide variety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make point contact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as the outer ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, this bearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known as Extra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating at very high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease in advance.