(800) 928-4430
Help Desk Software
7017CYP4 Nachi Angular Contact Bearing 85x130x22 Abec-7 Japan Bearings
    Close 7017CYP4 Nachi Angular Contact Bearing 85x130x22 Abec-7 Japan Bearings

    7017CYP4 Nachi Angular Contact Bearing 85x130x22 Abec-7 Japan Bearings

    Price: $581.88

    Code: Kit10842

    Product Descriptions

    High Precision Ball Bearing
    7017CYP4 Nachi Angular Ball Bearing
    15 degrees Contact Angle
    Abec-7
    85mm x 130mm x 22mm
    Made in Japan


    7017CYP4 Nachi high precision Angular Ball Bearing
    7017CYP4 Nachi high precision Angular Ball Bearing
    7017CYP4 Nachi high precision Angular Ball Bearing

    7017CYP4 Nachi high precision Angular Ball Bearing with 15 degrees contact angle and Polyamide resin cage, bearing is ABEC-7 (P4) quality and made in Japan.

    • Item: 7017CYP4 Nachi Ball Bearing
    • Type: Nachi Angular Ball Bearing
    • Cage: Polyamide resin cage
    • Quality: ABEC-7 (P4 quality)
    • Dimensions: 85mm x 130mm x 22mm/Metric
    • ID (inner diameter)/Bore: 85mm
    • OD (outer diameter): 130mm
    • Width/Height/thickness: 22mm
    • Size: 85 x 130 x 22 mm
    • Quantity: One Bearing
    • Dynamic load rating Cr: 60,500 N
    • Static load rating Cor: 59,000 N
    • Limiting Speed:
      • Grease Lubrication: 7,400 RPM
      • Oil Lubrication: 10,000 RPM
    • Made in Japan


    Dimensions
    d D B r r1 a
    85mm 130mm 22mm 1.1mm 0.6mm 1.4mm

    Nachi Single Row Angular Contact Bearing

    The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

    7017CYP4 Nachi Angular Contact Bearing 85x130x22 Abec-7 Japan Bearings :: Kit10842 :: Nachi ABEC-7 Precision Bearings

    7017CYP4 Nachi Angular Contact Bearing 85x130x22 Abec-7 Japan Bearings :: Kit10842 :: VXB Bearing :: Nachi ABEC-7 Precision Bearings

    *MARKER* 0