Product Descriptions

Precision Rolling Bearing 7006CYP4 Nachi Angular Ball Bearing 15 degrees Contact Angle Polyamide resin cage Abec-7 30mm x 55mm x 13mm Made in Japan

7006CYP4 Nachi Angular Ball Bearing and Bearing is Precision Rolling , bearing is 15 degrees Contact Angle, Polyamide resin cage and Abec-7, Made in Japan, inner diameter is 30mm, outer diameter is 55mm and width is 13mm. Item: 7006CYP4 Nachi Ball Bearing Type: Nachi Angular Ball Bearing Cage: Polyamide resin cage Quality: ABEC-7 Dimensions: 30mm x 55mm x 13mm/Metric ID (inner diameter)/Bore: 30mm OD (outer diameter): 55mm Width/Height/thickness: 13mm Size: 30 x 55 x 13 mm Quantity: One Bearing Dynamic load rating Cr: 16,000 N Static load rating Cor: 11,100 N Limiting Speed: Grease Lubrication: 19,000 RPM Oil Lubrication: 26,000 RPM Made in Japan Dimensions d D B r r1 30mm 55mm 13mm 1mm 0.6mm

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.