(800) 928-4430
Help Desk Software
7310 Nachi Angular Contact Bearing C3 Japan 50x110x27 Bearings
    Close 7310 Nachi Angular Contact Bearing C3 Japan 50x110x27 Bearings

    7310 Nachi Angular Contact Bearing C3 Japan 50x110x27 Bearings

    Rated based on reviews

    Price: $67.37

    Code: Kit10034

    Product Descriptions

    7310 Nachi Angular Ball Bearing
    40 Contact Angle & Steel Cage
    50mm x 110mm x 27mm
    Made in Japan


    7310 Nachi Angular Ball Bearing
    7310 Nachi Angular Ball Bearing



    7310 Nachi Angular Ball Bearing, bearing is 40 Contact Angle, Steel Cage and Flush Ground, Made in Japan, inner diameter is 50mm, outer diameter is 110mm and width is 27mm.

    • Item: 7310 Nachi Ball Bearing
    • Type: Nachi Angular Ball Bearing
    • Cage: Steel Cage
    • Dimensions: 50mm x 110mm x 27mm/Metric
    • ID (inner diameter)/Bore: 50mm
    • OD (outer diameter): 110mm
    • Width/Height/thickness: 27mm
    • Size: 50 x 110 x 27 mm
    • Quantity: One Bearing
    • Dynamic load rating Cr: 74,000 N
    • Static load rating Cor: 52,000 N
    • Limiting Speed:
      • Grease Lubrication: 5,600 RPM
      • Oil Lubrication: 7,500 RPM
    • Made in Japan

    Nachi Single Row Angular Contact Bearing

    The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

    7310 Nachi Angular Contact Bearing C3 Japan 50x110x27 Bearings :: Kit10034 :: 50mm inner diameter Bearings

    7310 Nachi Angular Contact Bearing C3 Japan 50x110x27 Bearings :: Kit10034 :: VXB Bearing :: 50mm inner diameter Bearings

    *MARKER* 0