(800) 928-4430
Help Desk Software
7208CYP5 Nachi Angular Contact Bearing 40x80x18:Abec-5:Japan
    Close 7208CYP5 Nachi Angular Contact Bearing 40x80x18:Abec-5:Japan

    7208CYP5 Nachi Angular Contact Bearing 40x80x18:Abec-5:Japan

    Price: $129.77

    Code: Kit10812

    Product Descriptions


    Nachi Angular Ball Bearings
    7208CYP5
    40mm x 80mm x 18mm
    15 Contact Angle
    Polyamide resin cage
    Abec-5
    Made in Japan







    7208CYP5 Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Abec-5 Made in Japan, here are the dimensions of the 7208CYP5, the 7208CYP5 inner diameter is 40mm, the 7208CYP5 outer diameter is 80mm, 7208CYP5 width is 18mm.

    • Item: 7208CYP5 Angular Ball Bearings
    • Dimensions: 40*80*18 mm/Metric
    • ID (inner diameter)/Bore=40mm
    • OD (outer diameter D1)=80mm
    • Width/Height/thickness=18mm
    • 7208CYP5 Type: Nachi Angular Ball Bearings
    • Cage: Polyamide resin cage
    • Quality: ABEC-5
    • Basic Dynamic Load Cr (KN): 36.5
    • Size: 40mm x 80mm x 18mm
    • Made in Japan
    • Quantity: One Bearing 7208CYP5
    d D B r r1 Basic Dynamic Load
    40mm 80mm 18mm 1.1 0.6 36.5

    Nachi Single Row Angular Contact Bearing

    The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

    7208CYP5 Nachi Angular Contact Bearing 40x80x18:Abec-5:Japan :: Kit10812 :: 40mm inner diameter Bearings

    7208CYP5 Nachi Angular Contact Bearing 40x80x18:Abec-5:Japan :: Kit10812 :: VXB Bearing :: 40mm inner diameter Bearings

    *MARKER* 0