(800) 928-4430
Help Desk Software

6300NR Nachi Bearing 10x35x11 Open C3 Snap Ring Japan Bearings
    Close 6300NR Nachi Bearing 10x35x11 Open C3 Snap Ring Japan Bearings
    Rated based on reviews

    6300NR Nachi Bearing 10x35x11 Open C3 Snap Ring Japan Bearings

    Price: $8.37

    Code: Kit9945

    Product Descriptions

    6300NR
    Nachi Bearing
    With Snap Ring (C clip)
    10mm x 35mm x 11mm
    Made in Japan


    6300NR Nachi Bearing 10x35x11:Open:C3:Snap Ring
    6300NR Nachi Bearing 10x35x11:Open:C3:Snap Ring

    6300NR Nachi Bearing with a Snap Ring, the 6300NR inner diameter is 10mm, the 6300NR outer diameter is 35mm, 6300NR width is 11mm.

    • Item: 6300NR Nachi Ball Bearing
    • Type: Nachi Deep groove Ball Bearings
    • Radial Clearance: C3
    • Dimensions: 10mm x 35mm x 11mm/Metric
    • ID (inner diameter)/Bore: 10mm
    • OD (outer diameter D1): 35mm
    • Width/Height/thickness: 11mm
    • Size: 10 x 35 x 11 mm
    • Quantity: One Bearing
    • Dynamic load rating Cr: 8,100 N
    • Static load rating Cor: 3,450 N
    • Limiting Speed:
      • Grease Lubrication: 23,000 RPM
      • Oil Lubrication: 27,000 RPM
    • Made in Japan

    Nachi Deep Groove Ball Bearings

    Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.

    6300NR Nachi Bearing 10x35x11 Open C3 Snap Ring Japan Bearings :: Kit9945 :: 10mm inner diameter Bearings

    6300NR Nachi Bearing 10x35x11 Open C3 Snap Ring Japan Bearings :: Kit9945 :: VXB Bearing online :: 10mm inner diameter Bearings

    *MARKER* 0