(800) 928-4430
Help Desk Software
6020NR Nachi Bearing Open C3 Snap Ring Japan 100x150x24 Large Bearings
    Close 6020NR Nachi Bearing Open C3 Snap Ring Japan 100x150x24 Large Bearings

    6020NR Nachi Bearing Open C3 Snap Ring Japan 100x150x24 Large Bearings

    Price: $129.37

    Code: Kit9916

    Product Descriptions

    6020NR Nachi Bearing
    100mm x 150mm x 24mm
    With Snap Ring (C clip)
    Made in Japan


    6020NR Nachi Bearing 100mm x 150mm x 24mm:Open:C3:Snap Ring
    6020NR Nachi Bearing 100mm x 150mm x 24mm:Open:C3:Snap Ring

    6020NR Nachi Bearing with a Snap Ring, Made in Japan. the 6020NR inner diameter is 100mm, the 6020NR outer diameter is 150mm, 6020NR width is 24mm.

    • Item: 6020NR Nachi Ball Bearing
    • Type: Nachi Deep groove Ball Bearings
    • Radial Clearance: C3
    • Dimensions: 100mm x 150mm x 24mm/Metric
    • ID (inner diameter)/Bore: 100mm
    • OD (outer diameter): 150mm
    • Width/Height/thickness: 24mm
    • Size: 100mm x 150mm x 24mm
    • Dynamic load rating Cr: 60,000 N
    • Static load rating Cor: 54,000 N
    • Limiting Speed:
      • Grease Lubrication: 4,300 RPM
      • Oil Lubrication: 5,300 RPM
    • Made in Japan
    • Quantity: One Bearing

    Nachi Deep Groove Ball Bearings

    Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.

    6020NR Nachi Bearing Open C3 Snap Ring Japan 100x150x24 Large Bearings :: Kit9916 :: Nachi Bearing with a Snap Ring

    6020NR Nachi Bearing Open C3 Snap Ring Japan 100x150x24 Large Bearings :: Kit9916 :: VXB Bearing :: Nachi Bearing with a Snap Ring

    *MARKER* 0