(800) 928-4430
Help Desk Software
7210 Nachi Angular Contact Bearing C3 Japan 50x90x20 Bearings
    Close 7210 Nachi Angular Contact Bearing C3 Japan 50x90x20 Bearings

    7210 Nachi Angular Contact Bearing C3 Japan 50x90x20 Bearings

    Price: $43.37

    Code: Kit10020

    Product Descriptions

    7210 Nachi Angular Ball Bearing
    40 Contact Angle & Steel Cage
    Made in Japan


    7210 Nachi Angular Ball Bearing
    7210 Nachi Angular Ball Bearing

    7210 Nachi Angular Ball Bearing, bearing is 40 Contact Angle, bearing has Steel Cage, inner diameter is 50mm, outer diameter is 90mm and width is 20mm.

    • Item: 7210 Angular Ball Bearing
    • Type: Nachi Angular Ball Bearing
    • Cage: Steel Cage
    • Dimensions: 50mm x 90mm x 20mm/Metric
    • ID (inner diameter)/Bore: 50mm
    • OD (outer diameter): 90mm
    • Width/Height/thickness: 20mm
    • Size: 50 x 90 x 20 mm
    • Quantity: One Bearing
    • Dynamic load rating Cr: 41,000 N
    • Static load rating Cor: 31,500 N
    • Limiting Speed:
      • Grease Lubrication: 6,300 RPM
      • Oil Lubrication: 8,500 RPM
    • Made in Japan

    Nachi Single Row Angular Contact Bearing

    The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

    7210 Nachi Angular Contact Bearing C3 Japan 50x90x20 Bearings :: Kit10020 :: Nachi Single Row Angular Contact Bearing

    7210 Nachi Angular Contact Bearing C3 Japan 50x90x20 Bearings :: Kit10020 :: VXB Bearing :: Nachi Single Row Angular Contact Bearing

    *MARKER* 0