VXB Ball Bearings

 





  Home > Inch (imperial) Bearings > 3/8" inner diameter = 0.375 inch >

  R6-2RS Sealed Bearing 3/8"x7/8"x9/32" inch Miniature
R6-2RS Sealed Bearing 3/8"x7/8"x9/32" inch Miniature


 
Our Price: $4.37
. Item: R6-2RS Ball Bearing
. Type: Deep Groove Ball Bearing
. Material: Chrome Steel
. Quality: Electric Motor Quality
. Closures: 2 Rubber Seals

Stock Status:In Stock
Product Code: KIT7488
Qty:

Description
 
R6-2RS Sealed Ball Bearing
3/8" x 7/8" x 9/32" inch
One Bearing


R6-2RS Sealed Bearing 3/8"x7/8"x9/32":vxb:Ball Bearing
R6-2RS Sealed Bearing 3/8"x7/8"x9/32":vxb:Ball Bearing

R6-2RS Sealed Ball Bearing, bearing is made of Chrome Steel, this bearing is sealed with rubber seals to protect the bearing from dust or any possible contamination, this is self lubricated bearing (bearing is already greased).

  • Item: R6-2RS Ball Bearing
  • Type: Deep Groove Ball Bearing
  • Material: Chrome Steel
  • Quality: Electric Motor Quality
  • Closures: 2 Rubber Seals
  • Dimensions: 3/8" x 7/8" x 9/32" inch
  • Inner Diameter: 3/8" inch
  • Outer Diameter: 7/8" inch
  • Width: 9/32" inch
  • Quantity: One Bearing
  • Dynamic load rating: 333.2 KGF
  • Static load rating: 142.2 KGF

Average Rating: 4.5 of 5 Total Reviews: 11 Write a review »

  0 of 0 people found the following review helpful:
 
As advertised October 11, 2015
Reviewer: Bones from Paso Robles, CA  
I used two of these for an outdoor whirligig. They were exactly what I expected and wanted. Good price for quality bearings.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Perfect September 13, 2015
Reviewer: D from Tn  
Perfect fit and function for a failing Dart with the AO smith motor.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
don't know May 29, 2015
Reviewer: scooby from MN  
I installed the bearing on the motor and shipped it to the customer and haven't heard back whether it works or not so I'm assuming it works fine now.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Very satisfied so far. February 27, 2015
Reviewer: Frank  
Used in a DIY vacuum chuck on a wood lathe. This use requires very little lateral load on the bearing.   Other than a slight vacuum leak though the bearing seals there performing great.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Bearings work great for my use. February 20, 2015
Reviewer: Phrank  
Bearings were used in a DIY vacuum chuck I built for use on my wood lathe.

Was this review helpful to you?

View All Customer Reviews