 |
 |
 |
 |
NU308MY Nachi Cylindrical Roller Bearing Bronze Cage 40mm x 90mm x 23mm Made in Japan
|
|
NU308MY Nachi Cylindrical Roller Bearings, Bronze Cage, Made in Japan, the NU308MY inner diameter is 40mm, the NU308MY outer diameter is 90mm, NU308MY width is 23mm.
- Item: NU308MY Nachi Roller Bearing
- Type: Nachi Cylindrical Roller Bearing
- Cage: Bronze Cage
- Dimensions: 40mm x 90mm x 23mm/Metric
- Inner Diameter: 40mm
- Outer Diameter: 90mm
- Width: 23mm
- Size: 40 x 90 x 23 mm
- Dynamic load rating Cr: 58,500 N
- Static load rating Cor: 57,000 N
- Limiting Speed:
- Grease Lubrication: 6,700 RPM
- Oil Lubrication: 8,000 RPM
- Quantity: One Bearing
- Made in Japan
|
Nachi Cylindrical Roller Bearings
Construction of this roller bearing type is the simplest of all radial roller bearings. This bearing type is often used in high-speed applications. Because the inner ring, outer ring, and rollers are in line contact, this bearing type has a large radial load capacity. Various Cylindrical roller bearing configurations are:N,NJ,NF,NU,RNU : integral ribs (flanges) NH,NP,NUP,NUH : integral and loose ribs NN,NNU : double-row bearings Configurations having integral flanges or loose ribs on both the inner and outer rings can sustain a small amount of axial load. Since this bearing type supports axial loads as sliding action between the end of the rollers and flange faces, axial loading is limited. Double-row Cylindrical roller bearings are used for high-speed, high-accuracy applications such as; main spindle support for lathes, milling machines, and machining centers. Radial clearance of tapered-bore bearings can be adjusted during mounting of the bearing(s) onto the mating journal. Standard cages are pressed steel or polyamide resin. Machined cages of high-strength brass are used for bearings of large dimension or for high-speed applications.
Kit10473
|
|
 |
 |
 |
 |

|