 |
 |
 |
 |
Nachi Cylindrical Roller Bearings NJ307EG 35mm x 80mm x 21mm Nylon Cage Made in Japan |
| NJ307EG Nachi Cylindrical Roller Bearings, Nylon Cage, Made in Japan, the NJ307EG inner diameter is 35mm, the NJ307EG outer diameter is 80mm, NJ307EG width is 21mm. - Item: NJ307EG Roller Bearing
- Type: Nachi Cylindrical Roller Bearing
- Cage: Nylon Cage
- Dimensions: 35mm x 80mm x 21mm/Metric
- ID (inner diameter)/Bore: 35mm
- OD (outer diameter): 80mm
- Width/Height/thickness: 21mm
- Size: 35 x 80 x 21 mm
- Quantity: One Bearing
- Dynamic load rating Cr: 66,500 N
- Static load rating Cor: 65,500 N
- Limiting Speed:
- Grease Lubrication: 7,500 RPM
- Oil Lubrication: 9,500 RPM
- Made in Japan
| Nachi Cylindrical Roller Bearings Construction of this roller bearing type is the simplest of all radial roller bearings. This bearing type is often used in high-speed applications. Because the inner ring, outer ring, and rollers are in line contact, this bearing type has a large radial load capacity. Various Cylindrical roller bearing configurations are:N,NJ,NF,NU,RNU : integral ribs (flanges) NH,NP,NUP,NUH : integral and loose ribs NN,NNU : double-row bearings Configurations having integral flanges or loose ribs on both the inner and outer rings can sustain a small amount of axial load. Since this bearing type supports axial loads as sliding action between the end of the rollers and flange faces, axial loading is limited. Double-row Cylindrical roller bearings are used for high-speed, high-accuracy applications such as; main spindle support for lathes, milling machines, and machining centers. Radial clearance of tapered-bore bearings can be adjusted during mounting of the bearing(s) onto the mating journal. Standard cages are pressed steel or polyamide resin. Machined cages of high-strength brass are used for bearings of large dimension or for high-speed applications. Kit13572
|
|
 |
 |
 |
 |

|