 |
 |
 |
 |
NJ2312EG Nachi Cylindrical Roller Bearing Nylon Cage 60mm x 130mm x 46mm Made in Japan
|
|
NJ2312EG Nachi Cylindrical Roller Bearings, Nylon Cage, Made in Japan, the NJ2312EG inner diameter is 60mm, the NJ2312EG outer diameter is 130mm, NJ2312EG width is 46mm.
- Item: NJ2312EG Cylindrical Roller Bearing
- Type: Nachi Cylindrical Roller Bearing
- Cage: Nylon Cage
- Radial Clearance: C4
- Dimensions: 60mm x 130mm x 46mm/Metric
- ID (inner diameter)/Bore: 60mm
- OD (outer diameter): 130mm
- Width/Height/thickness: 46mm
- Size: 60 x 130 x 46 mm
- Quantity: One Bearing
- Dynamic load rating Cr: 222,000 N
- Static load rating Cor: 262,000 N
- Limiting Speed:
- Grease Lubrication: 4,300 RPM
- Oil Lubrication: 5,300 RPM
- Made in Japan
|
Nachi Cylindrical Roller Bearings
Construction of this roller bearing type is the simplest of all radial roller bearings. This bearing type is often used in high-speed applications. Because the inner ring, outer ring, and rollers are in line contact, this bearing type has a large radial load capacity. Various Cylindrical roller bearing configurations are:N,NJ,NF,NU,RNU : integral ribs (flanges) NH,NP,NUP,NUH : integral and loose ribs NN,NNU : double-row bearings Configurations having integral flanges or loose ribs on both the inner and outer rings can sustain a small amount of axial load. Since this bearing type supports axial loads as sliding action between the end of the rollers and flange faces, axial loading is limited. Double-row Cylindrical roller bearings are used for high-speed, high-accuracy applications such as; main spindle support for lathes, milling machines, and machining centers. Radial clearance of tapered-bore bearings can be adjusted during mounting of the bearing(s) onto the mating journal. Standard cages are pressed steel or polyamide resin. Machined cages of high-strength brass are used for bearings of large dimension or for high-speed applications.
Kit14098
|
|
 |
 |
 |
 |

|