VXB Ball Bearings

 





  Home > Inch (imperial) Bearings > 1/4" inner diameter = 0.250 inch >

  Lot of 8 Shielded Extended Bearing 1/4"x22x7 Miniature
Lot of 8 Shielded Extended Bearing 1/4"x22x7 Miniature


 
Our Price: $39.95
. Item: 1/4" inch x 22mm x 7mm Ball Bearings
. Type: Deep Groove Ball Bearings
. Closures: Metal Shielded
. Dimensions: 6.35mm x 22mm x 7mm/Metric
. Inner Diameter: 1/4" inch

Stock Status:In Stock
Product Code: KIT1080
Qty:

Description
 
Lot of 8 Shielded Extended Miniature Ball Bearings
1/4" inch x 22mm x 7mm


"Lot

1/4" inch x 22mm x 7mm Deep Groove Radial Ball Bearings with extended inner race, bearings have Metal Shields, Bearings are made of Chrome Steel each bearings has 2 Metal Shields to protect the bearing from dust or any possible contamination, also bearings are pre-lubricated with grease.

  • Item: 1/4" inch x 22mm x 7mm Ball Bearings
  • Type: Deep Groove Ball Bearings
  • Closures: Metal Shielded
  • Dimensions: 6.35mm x 22mm x 7mm/Metric
  • Inner Diameter: 1/4" inch
  • Outer Diameter: 22mm
  • Width: 7mm
  • Size: 1/4" inch x 22mm x 7mm
  • Dynamic load rating Cr: 3,300 N
  • Static load rating Cor: 1,350 N
  • Limiting Speed:
    • Grease Lubrication: 34,000 RPM
  • Quantity: 8 Ball Bearings

Lot of 8 Shielded Extended Bearing 1/4"x22x7 Miniature

Kit1080


Average Rating: 5 of 5 Total Reviews: 9 Write a review »

  0 of 0 people found the following review helpful:
 
Good Bearings August 8, 2014
Reviewer: Nasty water boy from Amarillo, Texas  
Good product  exactly what I needed. Bearings are not being used for what they were intended for  but for our application they are great.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great July 26, 2012
Reviewer: hey you from nc  
great product hard to find

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
excellent bearings September 3, 2011
Reviewer: albertodesigns  
suppose I could have bought cheaper bearings and maybe you do sell ones that are( for jump ropes)  however  very satisfied with the ones purchased!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Works For Me! August 2, 2011
Reviewer: Cropduster from Reno, Nevada  
This bearing supports a model airplane propeller and spinner.  The assembly is installed at the grill of a car or truck just for the fun of having an aviation-related  spinning grill decoration.  (Factory grease is washed out  and replaced with silicone spray lube - without removing shields.) Adults and kids enjoy seeing the turning prop.  Some folks point; some wave; some grin like a Georgia possum.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
April 29, 2011
Reviewer: Jim-X from Lexington KY  
I changed my order and they handled it smoothly.

Was this review helpful to you?

View All Customer Reviews