VXB Ball Bearings

 





  Home > Bearings for Hobby > Fishing Reel Ball Bearings > Shimano Bearings >

  8x12 Sealed 8x12x3.5 Miniature Bearing Pack of 10
8x12 Sealed 8x12x3.5 Miniature Bearing Pack of 10


 
Our Price: $24.95
. Item: 8 x 12 x 3.5 Ball Bearings
. Type: Deep Groove Ball Bearings
. Closures: 2 Rubber Seals
. Lubrication: Self Lubricated (Grease)
. Size: 8mm x 12mm x 3.5mm

Stock Status:In Stock
Product Code: KIT727
Qty:

Description
 
8 x 12 x 3.5 Sealed Ball Bearings
Lot of 10 Bearings


"10
"10

8 x 12 x 3.5 Sealed Ball Bearings, Bearings are made of Chrome Steel, each bearing are rubber sealed from both sides to protect the bearing from dust or any possible contamination, also bearings are pre-lubricated with grease.

  • Item: 8 x 12 x 3.5 Ball Bearings
  • Type: Deep Groove Ball Bearings
  • Closures: 2 Rubber Seals
  • Lubrication: Self Lubricated (Grease)
  • Size: 8mm x 12mm x 3.5mm
  • Inner Diameter: 8mm
  • Outer Diameter: 12mm
  • Width: 3.5mm
  • Quantity: 10 Bearings
  • Dynamic load rating Cr: 570 N
  • Static load rating Cor: 300 N
  • Limiting Speed:
    • Grease Lubrication: 47,000 RPM
  • Packing: 10 bearings in One plastic tube
  • Fits: Tamiya, Kyosho
  • KOYO: WML8012ZZ
  • NSK: MR128ZZS
  • NMB: L-1280ZZ
  • FITS: COX BANDITO ULTRA STOCK
  • FITS: SCHUMAKER BOSS CAT 4 WHEEL DRIVE
  • FITS: SCHUMAKER BOSS CAT WORK EDITION
  • FITS: COUGAR WORKS
  • FITS: PRO CAT FORD CIERRA RS COSWORTH 4X4
  • FITS: SCHUMAKER XLS CAT
  • FITS: TAMIYA ACURA & JAGUAR(OPTIONAL)
  • FITS: TAMIYA FERRARI F189
  • FITS: TAMIYA NISSAN 3002X MERCEDES BENZ C11 F1
  • FITS: TAMIYA SAUBER(UP GRADES ALL F1'S BRGS)
  • FITS: TAMIYA TAO3-TAO3F CHASSIS
  • FITS: TAMIYA TERRELL F-40

8x12 Sealed 8x12x3.5 Miniature Bearing Pack of 10


kit727


Average Rating: 5 of 5 Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
 
one happy customer January 10, 2015
Reviewer: hillbilly  
I used these on my weber 32 36 dgav carb. Fit was perfect and the operation was smooth as glass.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Exactly what was needed October 27, 2014
Reviewer: Steve the Carby Man  
Perfect fit and performance for my Weber 32 36 DGEV carburetor spindles.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
So Far So Good October 18, 2012
Reviewer: Chuck from Northern Nevada  
I used these to replace the nylon bushings on a full suspention bicycle. I've been pounding on them for about 80 miles now. Still working like I just put them in. Much smoother than the bushings. No excposed lube to attract dirt into the pivot.

Was this review helpful to you?