VXB Ball Bearings

 





  Home > Bearing By Types > Bearings by Brand > NACHI-FUJIKOSHI CORP. Bearings | Authorized Distributor >

85BNC10S Nachi Angular Contact Bearing 85x130x22 Abec-7 Japan Bearings
85BNC10S Nachi Angular Contact Bearing 85x130x22 Abec-7 Japan Bearings


 
Our Price: $937.49
. Item: 85BNC10S Nachi Ball Bearings
. Type: Nachi Angular Ball Bearings
. Cage: Polyamide resin cage
. Quality: ABEC-7 (P4 quality)
. Dimensions: 85mm x 130mm x 22mm/Metric

Stock Status:In Stock
Product Code: KIT14681
Qty:

Description
 
High Precision Ball Bearings
85BNC10S Nachi Angular Ball Bearings
Abec-7
85mm x 130mm x 22mm
Made in Japan


"85BNC10S
"85BNC10S
"85BNC10S
"85BNC10S

85BNC10S Nachi high precision Angular pair of Ball Bearings with 15 degrees contact angle and Polyamide resin cage, pair of ball bearings is 2 duplex bearings, bearings are ABEC-7 (P4) quality and made in Japan.

  • Item: 85BNC10S Nachi Ball Bearings
  • Type: Nachi Angular Ball Bearings
  • Cage: Polyamide resin cage
  • Quality: ABEC-7 (P4 quality)
  • Dimensions: 85mm x 130mm x 22mm/Metric
  • ID (inner diameter)/Bore: 85mm
  • OD (outer diameter): 130mm
  • Width/Height/thickness: 22mm
  • Size: 85 x 130 x 22 mm
  • Quantity: Pair of Bearings
  • Dynamic load rating Cr: 98,500 N
  • Static load rating Cor: 118,000 N
  • Limiting Speed:
    • Grease Lubrication: 5,900 RPM
    • Oil Lubrication: 8,000 RPM
  • Made in Japan

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

Kit14681


Share your knowledge of this product. Be the first to write a review »