VXB Ball Bearings

 





  Home > Bearings for Hobby > Skate Bearings > Skateboard Bearings >

  8 Skateboard Extended Bearing with Built-in Spacers
8 Skateboard Extended Bearing with Built-in Spacers


 
Our Price: $19.49
. Item: 608RS Extended Skateboard Bearings
. Type: Extended Inner Ring Skateboard Bearings
. Material: Chrome Steel
. Closures: One side Rubber Seal
. Quantity: Set of 8 Bearing

Stock Status:In Stock
Product Code: KIT14048
Qty:

Description
 
608RS Skateboard Bearings With Extended inner race
8mm x 22mm x 7mm
inner race width=13mm
No Need for Spacers


"608RS
"608RS

608RS Skateboard Bearings With Extended inner race, that will eliminate the use of spacers,you will get more rigid/smooth wheel set when you use these bearings,these bearing is sealed on one side (the outer side) with rubber seal,Bearings are made of Chrome Steel,each bearing have One Rubber Seal to protect the bearing fromdust or any possible contamination.

  • Item: 608RS Extended Skateboard Bearings
  • Type: Extended Inner Ring Skateboard Bearings
  • Material: Chrome Steel
  • Closures: One side Rubber Seal
  • Quantity: Set of 8 Bearing
  • Size: 8mm x 22mm x 7mm/13mm
  • Inner Diameter: 8mm
  • Outer Diameter: 22mm
  • inner race Width: 13mm
  • outer ring width: 7mm

Average Rating: 5 of 5 Total Reviews: 4 Write a review »

  0 of 0 people found the following review helpful:
 
No spacers needed April 5, 2014
Reviewer: Purple Shredder from Hutto, Texas  
If only more people knew that bearings are designed to run with the inner race stationary  they would always use spacers or bearings of this design.  Work perfectly as long as the wheels are true.  If the bearing seat is out of alignment or the seats are too far apart  you will still have trouble.  There are several popular brands that have terrific formulas but the bearing seats are whack.  Best used with wheels that are properly moulded.  Have had good luck with core wheels.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Good balls Dim. March 17, 2014
Reviewer: Dmitriy from Russian Federation, Moscow  
Good balls

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Very Good Bearings! March 4, 2013
Reviewer: pnash5p  
For all around riding  no fuss installation  reasonable price  these are hard to beat.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Love having built in spacers for bearing July 15, 2012
Reviewer: ajax from Owego NY  
No adjustments needed. Just snug the lock nuts to the inner race and your are done. No loose inner races spinning on the axial. This will give the correct bearing alignment.

Was this review helpful to you?