VXB Ball Bearings

 





  Home > Metric Bearings > 30mm inner diameter Bearings >

  7906CYU/GLP4 Nachi Angular Contact Bearing 30x47x9 Abec-7 Bearings
7906CYU/GLP4 Nachi Angular Contact Bearing 30x47x9 Abec-7 Bearings


 
Our Price: $171.37
. Item: 7906CYU/GLP4 Nachi Ball Bearing
. Type: Nachi Angular Ball Bearing
. Cage: Phenolic cage
. Quality: ABEC-7 (P4 quality)
. Dimensions: 30mm x 47mm x 9mm/Metric

Stock Status:In Stock
Product Code: KIT10927
Qty:

Description
 
Super Precision Ball Bearing
7906CYU/GLP4 Nachi Angular Ball Bearing
Phenolic cage, Flush ground single units
15 degrees Contact Angle
Abec-7
30mm x 47mm x 9mm
Made in Japan


"7906CYU/GLP4
"7906CYU/GLP4
"7906CYU/GLP4

7906CYU/GLP4 Nachi super precision Angular Ball Bearing with 15 degrees contact angle and Phenolic cage, bearing is ABEC-7 (P4) quality and made in Japan. inner diameter is 30mm, outer diameter is 47mm and width is 9mm.

  • Item: 7906CYU/GLP4 Nachi Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Phenolic cage
  • Quality: ABEC-7 (P4 quality)
  • Dimensions: 30mm x 47mm x 9mm/Metric
  • ID (inner diameter)/Bore: 30mm
  • OD (outer diameter): 47mm
  • Width/Height/thickness: 9mm
  • Size: 30 x 47 x 9 mm
  • Made in Japan
  • Quantity: One Bearing


Dimensions
d D B r r1
30mm 47mm 9mm 0.3mm 0.15mm

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.


Share your knowledge of this product. Be the first to write a review »