VXB Ball Bearings

 





  Home > Metric Bearings > Bearings with Large inner diameter >

  7315BMU Nachi Angular Contact Bearing Brass Cage C3 75x160x37 Bearings
7315BMU Nachi Angular Contact Bearing Brass Cage C3 75x160x37 Bearings


 
Our Price: $205.88
. Item: 7315BMU Nachi Ball Bearing
. Type: Nachi Angular Ball Bearing
. Radial Clearance: C3
. Cage: Brass Cage
. Dimensions: 75mm x 160mm x 37mm/Metric

Stock Status:In Stock
Product Code: KIT10002
Qty:

Description
 
7315BMU Nachi Angular Ball Bearings
40 Contact Angle
Brass Cage & Flush Ground
75mm x 160mm x 37mm
Made in Japan


"7315BMU
"7315BMU


7315BMU Nachi Angular Ball Bearing, bearing is 40 Contact Angle, Brass Cage and Flush Ground, Made in Japan.

  • Item: 7315BMU Nachi Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Radial Clearance: C3
  • Cage: Brass Cage
  • Dimensions: 75mm x 160mm x 37mm/Metric
  • ID (inner diameter)/Bore: 75mm
  • OD (outer diameter): 160mm
  • Width/Height/thickness: 37mm
  • Size: 75 x 160 x 37 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 128,000 N
  • Static load rating Cor: 100,000 N
  • Limiting Speed:
    • Grease Lubrication: 3,400 RPM
    • Oil Lubrication: 4,500 RPM
  • Made in Japan

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.


Share your knowledge of this product. Be the first to write a review »