VXB Ball Bearings

 





  Home > Metric Bearings > Bearings with Large inner diameter >

7313 Nachi Angular Contact Bearing C3 Japan 65x140x33 Bearings
7313 Nachi Angular Contact Bearing C3 Japan 65x140x33 Bearings


 
Our Price: $107.37
. Item: 7313 Nachi Ball Bearing
. Type: Nachi Angular Ball Bearing
. Cage: Steel Cage
. Dimensions: 65mm x 140mm x 33mm/Metric
. ID (inner diameter)/Bore: 65mm

Stock Status:In Stock
Product Code: KIT10037
Qty:

Description
 
7313 Nachi Angular Ball Bearing
40 Contact Angle
Steel Cage
65mm x 140mm x 33mm
Made in Japan



"7313
"7313

7313 Nachi Angular Ball Bearing, bearing is 40 Contact Angle, Steel Cage and Flush Ground, Made in Japan, inner diameter is 65mm, outer diameter is 140mm and width is 33mm.

  • Item: 7313 Nachi Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Steel Cage
  • Dimensions: 65mm x 140mm x 33mm/Metric
  • ID (inner diameter)/Bore: 65mm
  • OD (outer diameter): 140mm
  • Width/Height/thickness: 33mm
  • Size: 65 x 140 x 33 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 111,000 N
  • Static load rating Cor: 82,000 N
  • Limiting Speed:
    • Grease Lubrication: 4,400 RPM
    • Oil Lubrication: 5,800 RPM
  • Made in Japan

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

Kit10037


Share your knowledge of this product. Be the first to write a review »