VXB Ball Bearings

 





  Home > Bearing By Types > Bearings by Brand > NACHI-FUJIKOSHI CORP. Bearings | Authorized Distributor >

7307BMUC3T103K Nachi Angular Contact 35x80x21 Japan Bearing
7307BMUC3T103K Nachi Angular Contact 35x80x21 Japan Bearing


 
Our Price: $66.95
. Item: 7307BMUC3T103K Nachi Ball Bearing
. Type: Nachi Angular Ball Bearing
. Dimensions: 35mm x 80mm x 21mm/Metric
. Bearing Inner Diameter: 35mm
. Bearing Outer Diameter: 80mm

Stock Status:In Stock
Product Code: KIT14550
Qty:

Description
 
7307BMUC3T103K Nachi Angular Ball Bearing
35mm x 80mm x 21mm
Made in Japan


"7307BMUC3T103K
"7307BMUC3T103K

7307BMUC3T103K Nachi Angular Ball Bearing, inner diameter is 35mm, outer diameter is 80mm and width is 21mm, Made in Japan.

  • Item: 7307BMUC3T103K Nachi Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Dimensions: 35mm x 80mm x 21mm/Metric
  • Bearing Inner Diameter: 35mm
  • Bearing Outer Diameter: 80mm
  • Bearing Width: 21mm
  • Size: 35 x 80 x 21 mm
  • Quantity: One Bearing
  • Dynamic Load Rating Cr: 37,500 N
  • Static Load Rating Cor: 24,900 N
  • Limiting Speed:
    • Grease Lubrication: 7,000 RPM
    • Oil Lubrication: 9,500 RPM
  • Made in Japan

Nachi Single Row Angular Contact Bearing

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

Kit14550


Share your knowledge of this product. Be the first to write a review »